I have a Roku Express and I've seen that they had trouble with the most recent update (January 2024). It won't perform the update, gives me the Error 004, and then mine won't even show the menu. Besides the "Roku" in the top left corner and the time in the top right, there is nothing on the screen. It's just my wallpaper theme. I have tried unplugging it and resetting it. However, I can't connect it to a different wifi network because I cannot see the menus.
Try factory resetting your device.
If it is one of the little streaming boxes, there should be a pin hole reset into which you can push a paperclip for a 10 second count while the device is powered on.
If it's something else, check your user's guide or Google your device and factory reset to find instructions.
I factory reset my Roku, ran through one update sequence and it's now working fine again.
Note that I did have to reconnect to my wireless network and I had to re-login to all my services, but it's been working great for several days now since the factory reset.
I think it cleared out the problematic update and then went straight from factory to latest version.
Fingers crossed!
Hi @LizzieLav,
A warm welcome to the Roku Community!
We would recommend taking a look at the troubleshooting steps provided by our Support page here: What should I do if my Roku® device is unable to update software?
In addition, we'd also recommend trying to connect your device to an alternate network, such as a mobile hotspot, to see if you can update your device. Then once your device has been updated, try switching back to your home wireless network.
Keep us posted with what you find out.
All the best,
Chel
My Express+ HD with Composite (https://www.roku.com/products/roku-express-plus-2018 Model 3910RW) started behaving in exactly the same way about a week ago - same behaviours:
Eventually, we found that either exercising great patience would allow the system to get to a menu screen (it would auto-reboot) and allow us to watch entire shows without incident, OR when it either at least made it to, but then hung on the logo/clock only screen, pulling the plug and re-booting it would eventually get it working again.
So every night we've been powering the Roku up earlier and earlier just to cycle through the repeated updates and reboots.
And I've tested my network connectivity when my Roku finally "gets its brain back" and it's good - so that's not the culprit.
I found this other thread (https://community.roku.com/t5/Features-settings-updates/Roku-express-cannot-update-3930x-no-matter-w...) where someone advised that there was a problem with the recent update, saying:
"The latest update - 12.5.5.4174 - is broken - once installed the 3930x does not work. Thus it is probably good that you cannot upgrade. Perhaps Roku have withdrawn the broken update until they can produce one that works?"
And frankly I was beginning to get the impression that this might be exactly what was happening to your and my device: they are stuck trying to apply an update they have downloaded that just isn't going to work - and they have a built-in safeguard to eventually revert to the older version if they can't, but you are forced to cycle through trying the update and multiple reboots before the software reverts to a "last well known good" version.
That said, I found this other thread (https://community.roku.com/t5/Features-settings-updates/Roku-3930X-is-stuck-on-bouncing-logo-screen/...) where Roku "recommend proceeding to factory resetting your Roku device" and the user reported that having solved the issue.
I can't say I recommend it, but maybe it "clears the device down" to a point where the update can "finally take".
I'm too chicken to try a factory reset because I don't want to entirely "brick" my device because they don't make the 3910RW anymore and I absolutely need the composite out for my audio soundbar. I wirelessly send the HDMI video to a speakerless ceiling mounted projector via a DVDO Air3c setup behind us, but have the wall that gets projected onto, soundbar and the Roku in front of us.
I hope they sort this out soon - it's REALLY annoying!
Hi @GothamCityMini,
Thank you for keeping us in the loop. We understand that you're having issues with your device, and we appreciate the steps you have taken in an attempt to fix the issue.
Rest assured, we are aware of the problem and are doing a thorough investigation into it as a team. Having said that, would you kindly supply us with further data?
We will be able to forward them to the relevant support team so they can look into them further after a few additional details have been collected. We look forward to hearing from you soon.
Sincerely,
Janadee
I’m having this exact problem too. I kept putting off the updates until I was forced to update, then got the error 004 message and now - nothing. I see the same thing on the screen that you described. I hope someone at Roku responds to this thread soon, as I’d really like to be able to use it again soon.
I factory reset my Roku, ran through one update sequence and it's now working fine again.
But thank you for reaching out to me Janadee!
Much appreciated.
Jim
Try factory resetting your device.
If it is one of the little streaming boxes, there should be a pin hole reset into which you can push a paperclip for a 10 second count while the device is powered on.
If it's something else, check your user's guide or Google your device and factory reset to find instructions.
I factory reset my Roku, ran through one update sequence and it's now working fine again.
Note that I did have to reconnect to my wireless network and I had to re-login to all my services, but it's been working great for several days now since the factory reset.
I think it cleared out the problematic update and then went straight from factory to latest version.
Fingers crossed!
that did the trick, thank you GothamCityMini!
Great to hear Aly!
I had the same problem, no choice to update, wait for download (>30 sec), then error 004 try back later. This was followed by no menu or channels - just wallpaper. Turned it off/on would either still show blank or go to the regular menu. Leave it off for a long time and it would again try to update. Model 3910rw - roku express+; software 12.5.0 build 4178-51.
Once I got the menu (several update tries and on/offs), I had it factory reset. Then it updated the software ending with build 4174-51 and is now working.
I had jotted down several settings I wanted to keep such as channel icon positions before the reset. I had to reapply settings such as wallpaper and turning off keyclick noise, but all channels were there. I did have to re-authorize/sign-in to several, but, overall not much work.
I wish I could have had the choice to skip the update once it was having trouble. Please consider adding to future software. Exiting to a blank screen should not be an acceptable roll out.
Thank you.