Remotes

Learn how to reset a Roku remote, how a Roku remote works, or pair a new remote.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
arios
Reel Rookie

Roku remote not blinking / not working

Jump to solution

I've been trying to use the remote but is not working. The green light is not blinking. I changed batteries already and tried pairing it with the back and home button pressed at once. Also plugged and unplugged Roku device for more than 20 seconds. This is the Roku Express 4K and the remote control is the one that came in the box

0 Kudos
3 Solutions

Accepted Solutions
RokuJharra-Q
Community Moderator
Community Moderator

Re: Roku remote not blinking / not working

Jump to solution

Hi, @arios. Thank you for posting here in the Roku Community!

We appreciate you for reaching out about the issue with your Roku remote. It might not be the batteries causing the problem but rather the remote setup. In the meantime, try resetting your remote and setting it up to control your TV.

We recommend trying the following steps to help resolve this issue:

Reboot your voice remote and device

Use the following steps to restart your streaming device.

  1. Remove the power cord from your streaming device
  2. Wait at least 5 seconds
  3. Re-connect the power cord

If your voice remote uses standard AA or AAA, you can reboot it by removing and reinstalling it.

  1. Remove the battery cover on the back of your remote
  2. Remove both batteries from the battery compartment
  3. Re-insert the negative (-) end of a battery first and then gently push the positive (+) end until the battery clicks into place
  4. Repeat the previous step to install the second battery
  5. Put the battery cover back on your remote

Repair your voice remote to your streaming device

If your voice remote has a pairing button, it will be located either on the back of the remote or under the battery cover. Press and hold the pairing button for 5 seconds or until you see the status light begin to flash.

If your voice remote does not have a pairing button, press and hold the Back and Home buttons for 5 seconds or until you see the status light begin to flash.

Please try doing this and see if it helps with what you're experiencing.

Please keep us posted!

Thanks,
Jharra

Jharra Q.
Roku Community Moderator

View solution in original post

0 Kudos
RokuJharra-Q
Community Moderator
Community Moderator

Re: Roku remote not blinking / not working

Jump to solution

Hi Community user,

We see that you're having trouble pairing your remote with your Roku device, and we're here to help. Here are the steps to pair your Roku voice remote:

Reboot your voice remote and device

Use the following steps to restart your streaming device.

  1. Remove the power cord from your streaming device
  2. Wait at least 5 seconds
  3. Re-connect the power cord

If your voice remote uses standard AA or AAA, you can reboot it by removing and reinstalling it.

  1. Remove the battery cover on the back of your remote
  2. Remove both batteries from the battery compartment
  3. Re-insert the negative (-) end of a battery first and then gently push the positive (+) end until the battery clicks into place
  4. Repeat the previous step to install the second battery
  5. Put the battery cover back on your remote

Note:

  • If this is your first time pairing this remote, you can try doing a factory reset and pairing the remote. 
  • If your Roku device has been previously activated and paired, follow these steps to reconnect the remote.

Using the installed Roku mobile app or another Roku remote that works with your streaming device, follow the following steps to put your device into pairing mode from the Settings menu.

  1. Press Home on your working remote or from the Roku mobile app
  2. Scroll and select Settings
  3. Select Remotes & devices
  4. Select Add devices
  5. Select Remote
  6. Select Continue
  7. Follow the on-screen instructions to pair your voice remote

Restart your streaming device to enter pairing mode:

If you do not have a second Roku remote that already works with your streaming device or the Roku mobile app installed, you can restart your streaming device to put it in pairing mode. When your streaming device is powered on, it will automatically enter pairing mode and look for remotes.

Use the following steps to restart your streaming device.

  1. Remove the power cord from your streaming device
  2. Wait at least 5 seconds
  3. Re-connect the power cord

Once you see the Home screen, follow the steps in the next section to put your voice remote into pairing mode and complete the pairing process with your streaming device.

This should resolve the issue you are experiencing; however, if it is still unresolved, please reply, and we will be able to assist you further.

Thanks,
Jharra

Jharra Q.
Roku Community Moderator

View solution in original post

0 Kudos
RokuJharra-Q
Community Moderator
Community Moderator

Re: Roku remote not blinking / not working

Jump to solution
Hello @hsherThank you for keeping us posted!

We understand, and we appreciate your attempt to resolve your Roku remote issues. If you are having problems or if you want to return the remote, please make sure to get a Return Material Authorization (RMA) number first. Before requesting a refund or replacement, it's important to fully understand the process outlined in this article: Step-by-step instructions for returns and warranty replacements.

We also recommend following our troubleshooting steps to assist you in resolving these remote issues:
This should resolve the issue you are experiencing; however, if it is still unresolved, please reply, and we will be able to assist you further.

Thanks,
Jharra
Jharra Q.
Roku Community Moderator

View solution in original post

0 Kudos
21 REPLIES 21
RokuJharra-Q
Community Moderator
Community Moderator

Re: Roku remote not blinking / not working

Jump to solution

Hi, @arios. Thank you for posting here in the Roku Community!

We appreciate you for reaching out about the issue with your Roku remote. It might not be the batteries causing the problem but rather the remote setup. In the meantime, try resetting your remote and setting it up to control your TV.

We recommend trying the following steps to help resolve this issue:

Reboot your voice remote and device

Use the following steps to restart your streaming device.

  1. Remove the power cord from your streaming device
  2. Wait at least 5 seconds
  3. Re-connect the power cord

If your voice remote uses standard AA or AAA, you can reboot it by removing and reinstalling it.

  1. Remove the battery cover on the back of your remote
  2. Remove both batteries from the battery compartment
  3. Re-insert the negative (-) end of a battery first and then gently push the positive (+) end until the battery clicks into place
  4. Repeat the previous step to install the second battery
  5. Put the battery cover back on your remote

Repair your voice remote to your streaming device

If your voice remote has a pairing button, it will be located either on the back of the remote or under the battery cover. Press and hold the pairing button for 5 seconds or until you see the status light begin to flash.

If your voice remote does not have a pairing button, press and hold the Back and Home buttons for 5 seconds or until you see the status light begin to flash.

Please try doing this and see if it helps with what you're experiencing.

Please keep us posted!

Thanks,
Jharra

Jharra Q.
Roku Community Moderator
0 Kudos
arios
Reel Rookie

Re: Roku remote not blinking / not working

Jump to solution

I’ve tried all that’s mentioned but haven’t worked. 

0 Kudos
RokuJharra-Q
Community Moderator
Community Moderator

Re: Roku remote not blinking / not working

Jump to solution

Hey, @arios, thanks so much for keeping us in the loop!

We really appreciate you reaching out to us and sharing the troubleshooting steps you've taken. We've sent you a private message to provide you with more help on this issue.

Thank you for your understanding and continued participation in our community.

Best regards,
Jharra

Jharra Q.
Roku Community Moderator
0 Kudos
burns2
Newbie

Re: Roku remote not blinking / not working

Jump to solution
 
0 Kudos
Alligam
Newbie

Re: Roku remote not blinking / not working

Jump to solution

I have the same issue and have followed all of the troubleshooting steps above.

0 Kudos
kpiskulich
Newbie

Re: Roku remote not blinking / not working

Jump to solution

My Roku in not work and was working just fine in the past.   Replaced batteries and tried the reset button on the device.   I have no light on my device.   Need to have it replaced?   I can't talk to a person at Roku which very frustrating.   

0 Kudos
Sharshep
Reel Rookie

Re: Roku remote not blinking / not working

Jump to solution

I have tried all of the suggestions about this issue but still have no blinking, no pairing no response from remote.  

0 Kudos
Sharshep
Reel Rookie

Re: Roku remote not blinking / not working

Jump to solution

I have done all to repair that is suggested nothing is working 

0 Kudos
Meena2024
Newbie

Re: Roku remote not blinking / not working

Jump to solution

I am having the same issue and have tried all of your steps without success…please help!

0 Kudos
Need Assistance?
Welcome to the Roku Community! Feel free to search our Community for answers or post your question to get help.

Become a Roku Streaming Expert!

Share your expertise, help fellow streamers, and unlock exclusive rewards as part of the Roku Community. Learn more.