I have done all that 10 times and it doesn't work. LOL...I just posted to someone that it has been working for 2 weeks. Now, it just stopped working again. spin and spin. There are hundreds of people who have this issue. Why?
LOL...it just stopped working
I own two Roku Express devices, one purchased about a year ago, the other purchased less than 6 months ago. Out of nowhere, neither of them would connect to my wireless network last night. I restarted both devices, I restarted my router, I did a factory reset on the newer device and still nothing.
I checked the 2.4GHz/5GHz settings on the router. Both lights are lit up and flashing intermittently. Nothing has changed with the router (the router is also less than 6 months old), nothing has changed with my internet service, literally nothing has changed except the fact that neither device can connect now.
Is there anyway to speak with a human at Roku? Does anyone have any suggestions?
You didnt mention your Roku's model #s or firmware version(s): Settings/System/About.
However, based on the fact that they are Express models purchased 5+ months ago, they likely only support 2.4Ghz.
Because they are Express models, they are ineligible for Agent-Assisted support.
Its possible your ISP changed your modem/router/gateway's (brand/model unknown) configuration/updated its firmware - go into its configuration pages and verify 2.4Ghz is enabled, and configure it for channel 1, 6, or 11, disable any "B" mode compatibility, and set the channel width to 20Mhz.
Additionally, the 2.4Ghz and 5Ghz SSIDs should be different/separate (they can have the same password) - if they arent, change them so they are.
Restart all devices after making any changes, and see if the Expresses connect.
Appreciate the response.
Have you tried connecting your Roku to a mobile hotspot? Does it do the same thing? Please also provide us the following information for further investigation:
-Roku device model
-Serial number
-Device ID
-Software OS/version
(these can all be found in Settings > System > About)
-Tracker ID when this issue occurs (when you see this issue occur, press the Home button 5 times, followed by the Back button 5 times)
-Steps to reproduce the issue you are seeing
With more information, we will be able to assist you further.
All the best,
Kariza
Hi, I did this about 6 weeks ago with Danny who works for ROKU. The only thing he didn't ask was Tracker ID.. Several people sent the information to him. I'm not trying to be difficult, but it seems as though everyone is sending stuff and we hear nothing. I will do it one more time, tomorrow and that's it. If it were just me, I could understand, but take a look at the forum...it is loaded with your customers that have the same issue.
Barb
Model 3810X
@Barb47 Your Roku has a dual band WiFi radio, so it works on both 2.4 and 5 GHz. First see if your router is using different SSIDs for the two radios. If not, I suggest doing so, so you can choose which band you are using.
Next, for the 5 GHz radio, check the channel number and width. The channel number should be 49 or below, or 148 or higher. Any other channel might not be supported by your Roku. The channel width should not be set higher than 60 MHz, and in reality 40 MHz is fine for devices like a Roku.
On the 2.4 GHz radio, the channel must be between 1 and 11. If it's on 12, 13 or 14, your Roku won't see it. Also disable all protocols other than 802.11n. If you have some really old wireless equipment you might need to enable both g and n, but try n alone first.
Channel 6
2.4
802 11n