Issue Tracking Board

Status updates, outage reports, fixes, and workarounds. Subscribe to a thread be notified of updates!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

When I push the arrow button, it skips more than once. Is my remote going bad?

Jump to solution

When I'm in an app and I push the arrow buttons, doesn't matter which one, it skips more than once and I can't land on what I want. Is my remote going bad? And yes I have put new batteries in it.

Strega2
Roku Guru

Re: When I push the arrow button, it skips more than once. Is my remote going bad?

Jump to solution

Probably not your remote.  I see lots of posts about this.  I had it myself around a week ago and did a system restart and was fine after that.  So far at least!  For me it started in Pluto TV and I haven't been back into Pluto since then. That doesn't mean that Pluto is "the cause" though.  That's just how it happened to me.

Banned but back. Because why not?
rbhous
Newbie

Re: Remotes skipping multiple channels

Jump to solution

I am having the same issue on 4 device that started 3 days ago.  I have 3 ultras and 1 soundbar pro and all are skipping multiple episodes when trying to choose.  I have restarted, repaired, unplugged and plugged back in and still the same issue on all devices.   This issue has been posted multiple times in the community, so I think it is a known issue without a known fix.

SVSP
Newbie

Re: Remotes skipping multiple channels

Jump to solution

 I had the same issue. Here's how to fix:

Home-->Settings -->System-->Software Update

then...

Home --> Settings--> System-->Power--> System Restart

Dewey-75
Newbie

Re: Remotes skipping multiple channels

Jump to solution

Both of my Roku’s started doing this within a couple days of each other.  I unplugged them from the tv and power source for 5 minutes and it fixed the problem on both.   I hope you’re as lucky as I was!  

Re: Remote not working skips channels

Jump to solution

I had the exact same problem and I used your suggestions. In my case the Roku box didn't have the plastic piece covering the front but it did have a heavy layer of dust. I cleaned off the dust and reset the network connection and it's working normally now. Thanks for the tips.

0 Kudos
casademilo
Newbie

Re: Remotes skipping multiple channels

Jump to solution

Followed your (SVSP) suggested prompts to do a system update, even though Roku said it had already done a system update this morning, I did it anyway and then did a restart as suggested. It worked!

ErSl
Newbie

Re: Remote not working skips channels

Jump to solution

This worked. Had the plastic strip( for years actually) did the reset and it works now. 
Had the issue on all apps that I frequently use except Kids City. Scrolling worked fine on it. 
And yeah didn’t have this issue on the Roku Home Screen. 
Thanx. 🤝

0 Kudos
Officedrone
Channel Surfer

Remote erratically skips or jumps over multiple content in some platforms

Jump to solution

This is a new problem for me.  

I do not have any problem on PRIME.  This makes me think that skipped items and jumping cursors have to do w new software used on HULU, MAX, and similar channels.

I am using new batteries.  There are no new lights or IR sources in my room.

makaiguy
Community Streaming Expert

Re: Remote erratically skips or jumps over multiple content in some platforms

Jump to solution

@Officedrone-

Some people with your problem, not everybody, have eliminated the problem by restarting the Roku. (Note that if yours is a Roku TV with "Fast start" enabled, turning it off and back on just puts it into and out of a standby state and does NOT give you a complete restart.)

Depending on your Roku model and Roku version number you'll find the "System restart" option under "Settings > System > Power" or if you don't have a "Power" option, under "Settings > System".

If a restart doesn't do it, or if you don't have sufficient control with the remote to navigate the Roku menus, you can also restart by pulling the power plug to the Roku for a few seconds then plugging it back in and waiting for it to restart.

Roku Community Streaming Expert
I am not a Roku employee, only a user like you.  Please, no support questions via private message -- post them publicly to the Community where others may benefit as well.
If this post solves your problem please help others find this answer by clicking "Accept as Solution.".

Ultra 4800 | Streaming Stick 4K+ 3821 | TCL Roku TV 43S245/C107X
Need Assistance?
Welcome to the Roku Community! Feel free to search our Community for answers or post your question to get help.

Become a Roku Streaming Expert!

Share your expertise, help fellow streamers, and unlock exclusive rewards as part of the Roku Community. Learn more.