Remotes

Learn how to reset a Roku remote, how a Roku remote works, or pair a new remote.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Cannot pair remote after factory reset

Remote stopped working. After factory reset on stick+, the remote will not pair. We are stuck on remote pairing screen. Because of reset, I cannot use mobile app because stick is likely not on WiFi. How do we get it to function again? It is a new voice remote.

 

0 Kudos
5 REPLIES 5
RokuJharra-Q
Community Moderator
Community Moderator

Re: Cannot pair remote after factory reset

Hi, @Elmerhouse26, Greetings here in the Roku Community!

We understand that you wish to pair your remote, and we appreciate your letting us know. We're here to assist you with this.

We recommend the following steps to pair your remote:

  • Restart your Roku device: by unplugging it and then plugging it back in.

(If your voice remote has a pairing button, it will be located either on the back of the remote or under the battery cover.)

  • Press and hold the pairing button for 5 seconds, or until you see the status light begin to flash, to put your voice remote into pairing mode.

image.png 

(If your remote does not have a pairing button, use the steps in the next section instead.)

  • If your voice remote does not have a pairing button, press and hold the Back and Home buttons for 5 seconds, or until you see the status light begin to flash.

We recommend following the steps outlined above. If your device still has not paired, please note that both your voice remote and streaming device need to be in pairing mode at the same time to complete the pairing process. Please attempt the previous steps again to ensure that both your Roku streaming device and voice remote are in pairing mode.

If have already tried to pair your remote and streaming device again, visit the article with detailed instructions on how to fix issues with your Roku voice remote.

Hope this helps!

Thanks,
Jharra

Jharra Q.
Roku Community Moderator
0 Kudos
All47verses
Binge Watcher

Re: Cannot pair remote after factory reset

Hi, @Elmerhouse26 . Roku says it will send you a free HDMI extender if your Roku Streaming Stick might be getting interference from the stick being plugged directly into your TV. Start out by ordering that through the form at my.roku.com/hdmi . Even if the stick worked that way before, the HDMI port might have problems now.

Hope this helps--

All47verses

RokuJharra-Q
Community Moderator
Community Moderator

Re: Cannot pair remote after factory reset

Hi, @All47verses@Elmerhouse26,

Thanks for sharing on the Roku Community!

I just wanted to add to what @All47verses mentioned—using an HDMI extender can help you position your Stick closer to your WiFi router. If the troubleshooting steps mentioned above don't work, you can get a free Roku HDMI extender from our Roku page HDMI extender and see if it makes any difference. 

We would recommend trying to see if that resolves your issue. Please keep us posted.

Thanks,
Jharra

Jharra Q.
Roku Community Moderator
0 Kudos
All47verses
Binge Watcher

Re: Cannot pair remote after factory reset

@Elmerhouse26, there are a few easy troubleshooting things you can try early on. First, if you have a friend with a Roku, ask if you can try to pair your remote with their streamer. (Your friend can easily click on "Forget this remote" once your test is done.) That will help determine if the trouble is in the remote.

If that's not an option, at least be sure there are fresh alkaline batteries installed if the batteries are removable, or that an internal battery is fully charged.

Then try moving the stick to each of the other HDMI ports on your TV to see if you have any better luck getting past the pairing screen. As soon as one works, go all the way through the initial setup process -- you can try moving the stick back to its original HDMI port later.

If that doesn't help and you have a second TV with HDMI ports, try installing the streamer on that TV. Sometimes these things are just finicky during installation. You can always change settings after you move the stick back to the TV you want it on.

Hope this helps. Good luck!

All47verses

 

RokuJharra-Q
Community Moderator
Community Moderator

Re: Cannot pair remote after factory reset

Hey there, @All47verses!

We appreciate you sharing your input on this. Your feedback and any further details you provide will be very helpful for our community users dealing with the same issue. We're eager to get this sorted out as quickly as possible.

Keep on streaming, and have a great time! 💜

Thanks,
Jharra

Jharra Q.
Roku Community Moderator
0 Kudos
Need Assistance?
Welcome to the Roku Community! Feel free to search our Community for answers or post your question to get help.

Become a Roku Streaming Expert!

Share your expertise, help fellow streamers, and unlock exclusive rewards as part of the Roku Community. Learn more.