Hi @MercatorRete,
Welcome to the Roku Community!
We can certainly understand your concern about your Roku device that is unable to update software and we sincerely apologized for the inconvenience this has caused.
In the meantime, please help us with the required details below so we can send additional information for the investigation to our engineering team, and once more information is available I'll be sure to let the Community know:
Once we have this information, I'll be able to pass it along to our Support team who can investigate further.
Best regards,
Mary
Thanks for you reply.
Here is all the information I can provide regarding this unit:
Model: 3900x
Version: 519.20E04806A
Build date: 20191203 02:53
S/N: YGG002M497527
Device ID: C33832497527
Tracking Info: ID27-484-047
Once again I have tried all the suggestions offered (on your support pages regarding this problem) to resolve this issue. I have tried two other networks all with th e same failure.
Did factory reset, reset wireless modem attempted to update numerous times. Always the same results.
I'm not able to get past the "software update" in order to provide you with some if the information you requestedin your reply.
I have another 3900x on the same network and that one works OK. I have even disconnected that working unit and put this failed unit in it place and tried to update.
The failed unit was in my office and was working perfectly. I closed my office and ended that network account. When I brought this second 3900x home to use I had to reconnect to my current ISP/ Doing that initiated the need to create a WiFi connection and have to unit look for the latest software update.
Hi @MercatorRete,
Thanks for keeping in touch and providing the additional information.
We appreciate your patience regarding this issue. We understand that you are having difficulties with your Roku device that is stuck in the error message "software update".
We'll go ahead and send this over to the team for investigation. We'll get back to you once we have an update.
We're hoping to get everything sorted out soon and appreciate you bearing with us in the meantime.
Best regards,
Mary
Hi,
Sorry to hijack this thread slightly. I have recently experienced the same fault with my Roku Express 3900x.
I tried a manual software update when the device was working, it would spin for hours without getting anywhere. On the advice of these forums I did a factory reset and the device is now essentially bricked as on launch it asks for a WiFi connection buy then endlessly spins on trying to update.
I have tried connecting to different networks, including using my phone data, restarting my home router, and have tried the hard reset button on the device too.
My device info is:
FCC ID: TC2-R1019
IC: 5959A-R1019
Serial Number: E63957919570
I have another 3900x in another room, that is working fine and has recently successfully updated. The now faulty unit was not used for quite a while so was trying to update from a much older version (9 I think).
I would appreciate someone from your technical support team getting in touch with me, and as per some of the other forum threads would ideally like for them to arrange for a replacement to be issued. I can, of course, return my faulty unit.
Cheers, Lewis
Hi @lewisbarnes,
Thanks for your first post in the Roku Community!
We understand you are having difficulties updating your Roku device and we appreciate you for providing essential information about the issue you are experiencing.
In addition to the information you just provided, Can you please provide us with the following information:
We also suggest checking our Roku Support for additional help in solving an issue with your Roku device that is unable to proceed to software update: What to do if your Roku streaming device is unable to update software | Official Roku Support
Please keep us posted and we'll continue assisting you from there.
Best regards,
Mary
Hi,
In answer to your questions:
1 - there's a solid white light on the front of the device when it's switched on
2 - I've tried powering the device using both a TV USB port the wall plug adapter provided. Same results with both
3 - I have also tried a different hdmi cable as I plugged the faulty device into the TV with the working device. Same result here too.
I've looked at the other forum posts and faq and certain I'm experiencing the same fault as the other members on the forum.
Can you put the support team in contact with me please so we can arrange for a replacement device to be sent out and my (now) faulty one returned.
Cheers, Lewis
Hi @lewisbarnes,
Thanks for keeping in touch.
We appreciate you for providing all the information we requested and we're sorry for the inconvenience about the issue with your Roku device not updating to the software.
Can we request the required information below:
Once we have this information, we will be able to pass it along to the appropriate Roku team to work with the channel partner to investigate further. We look forward to your responses and gathering your details.
Best regards,
Mary
Unfortunately I can't give you either of those things. Following the factory reset the device isn't able to complete the startup process successfully - as it gets stuck on checking for update after connecting to the WiFi network - and therefore the System page isn't accessible to give you the OS version number. Additionally, the device never throws an error, and following your instructions when the device is checking for the update does nothing. The people before me who had the same issue reported this same behaviour when they were asked to follow those instructions too.
Cheers
I recently posted on this thread that I (like numerous other users) have experienced a chronic problem while attempting to upgrade to the latest software.
After waiting a week for a resolution to this issue I am now wondering....
What is the current status of resolving this problem with these 3900x Roku devices?
Mine is doing the same thing, I think it is useless now. It worked (on a few channels) before I did a factory reset and now it’s just stuck checking for new software. I hope someone can help.