Discussions

Is your Roku TV not working? Join our online community forum to find help with common Roku TV issues, get troubleshooting tips, and share your experiences.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Bronchos32
Newbie

TV is in recovery mode and I’ve tried everything that I know and still won’t reset

Jump to solution
 
0 Kudos
2 Solutions

Accepted Solutions
RokuTakashi
Community Moderator
Community Moderator

Re: TV is in recovery mode and I’ve tried everything that I know and still won’t reset

Jump to solution

Hi, @Bronchos32 

Thanks for posting, and welcome to the Roku Community.

We understand the problem you've encountered with your Roku TV in recovery mode. We'd be glad to assist you in getting things back on track. Let's perform a troubleshooting step to exit you from the recovery mode and re-activate your Roku TV again. Kindly follow the steps below:

Recovery Mode

Initiate commands on your Roku TV to enter recovery mode once again to set it up.

  1. Locate the pinhole Reset button on the back of your TV, near the antenna, HDMI, and audio connections.
  2. Using a straightened paperclip (or similar), press and hold the reset button for at least 20 seconds.

    After a moment, your TV will restart and display the Recovery Mode screen.

Once you're in the Recovery Mode, follow the instructions to proceed. TV will download and install the software before restarting. This may take a few moments, after which time you may be asked to perform the Guided Setup and activation process, depending on the state of your TV, prior to using Recovery Mode. 

For more information, kindly visit the official Roku support article on How to use Recovery Mode on your Roku TV system

We trust in you that you find this issue helpful, and feel free to contact us if you have further assitance.

Best wishes,
Kash

Takashi O.
Roku Community Moderator

View solution in original post

0 Kudos
RokuJanadeeK
Retired Moderator

Re: TV is in recovery mode and I’ve tried everything that I know and still won’t reset

Jump to solution

Hi @vale_jaylene,

Thanks for keeping us in the loop.

Kindly ensure that the remote's batteries are new and functioning to control the Roku device. You can refer to this support article on ways to fix your Roku remote.

We hope this helps. Keep us posted.

Regards,
Janadee

Nadee K.
Roku Community Moderator

View solution in original post

0 Kudos
9 REPLIES 9
Bronchos32
Newbie

Re: TV is in recovery mode and I’ve tried everything that I know and still won’t reset

Jump to solution

I also can’t seem to find the $ sign on keypad to enter password for WiFi 

0 Kudos
renojim
Community Streaming Expert

Re: TV is in recovery mode and I’ve tried everything that I know and still won’t reset

Jump to solution

For the $, on the keyboard that's displayed select the !?#$%& button to the right of the number pad and you'll get a whole set of different characters.  Select the ABC123 to get back to the regular keyboard characters.

Roku Community Streaming Expert

Help others find this answer and click "Accept as Solution."
If you appreciate my answer, maybe give me a Kudo.

I am not a Roku employee.
0 Kudos
RokuTakashi
Community Moderator
Community Moderator

Re: TV is in recovery mode and I’ve tried everything that I know and still won’t reset

Jump to solution

Hi, @Bronchos32 

Thanks for posting, and welcome to the Roku Community.

We understand the problem you've encountered with your Roku TV in recovery mode. We'd be glad to assist you in getting things back on track. Let's perform a troubleshooting step to exit you from the recovery mode and re-activate your Roku TV again. Kindly follow the steps below:

Recovery Mode

Initiate commands on your Roku TV to enter recovery mode once again to set it up.

  1. Locate the pinhole Reset button on the back of your TV, near the antenna, HDMI, and audio connections.
  2. Using a straightened paperclip (or similar), press and hold the reset button for at least 20 seconds.

    After a moment, your TV will restart and display the Recovery Mode screen.

Once you're in the Recovery Mode, follow the instructions to proceed. TV will download and install the software before restarting. This may take a few moments, after which time you may be asked to perform the Guided Setup and activation process, depending on the state of your TV, prior to using Recovery Mode. 

For more information, kindly visit the official Roku support article on How to use Recovery Mode on your Roku TV system

We trust in you that you find this issue helpful, and feel free to contact us if you have further assitance.

Best wishes,
Kash

Takashi O.
Roku Community Moderator
0 Kudos
vale_jaylene
Reel Rookie

Re: TV is in recovery mode and I’ve tried everything that I know and still won’t reset

Jump to solution

I’ve done this. And it takes me to choose your language but it won’t let me chose anything. It’s like frozen 

0 Kudos
RokuJanadeeK
Retired Moderator

Re: TV is in recovery mode and I’ve tried everything that I know and still won’t reset

Jump to solution

Hi @vale_jaylene,

Thanks for keeping us in the loop.

Kindly ensure that the remote's batteries are new and functioning to control the Roku device. You can refer to this support article on ways to fix your Roku remote.

We hope this helps. Keep us posted.

Regards,
Janadee

Nadee K.
Roku Community Moderator
0 Kudos
vale_jaylene
Reel Rookie

Re: TV is in recovery mode and I’ve tried everything that I know and still won’t reset

Jump to solution

I’ve done all of this, So in recovery mode and asked me to connect to the Internet, which I do. Once it’s connected to my WiFi I click “update now” which it restarts my tv. Then it takes me to a “let’s get started” and it gives me options in languages to pick. But it doesn’t allow my control to press anything. It doesn’t allow me to press OK or move between different options of languages. It’s as if my control doesn’t work. But earlier my control was working because it allowed me to put in my Wi-Fi password .

0 Kudos
RokuJanadeeK
Retired Moderator

Re: TV is in recovery mode and I’ve tried everything that I know and still won’t reset

Jump to solution
Nadee K.
Roku Community Moderator
0 Kudos
jheeley
Newbie

Re: TV is in recovery mode and I’ve tried everything that I know and still won’t reset

Jump to solution

this is happening to my tv as well all of the sudden. I connected to wifi, installed the update, restarts and boots back up into recovery mode. I tried a different wifi, updated, restarts back in recovery mode. I downloaded the USB update file, got the code to install it, updated and rest in recovery mode. why isn't this working?

Scribsdf
Newbie

Re: TV is in recovery mode and I’ve tried everything that I know and still won’t reset

Jump to solution

This same thing is happening to me. I have a TCL 75” QLED TV model 75R635. Roku version listed is 9.10E01678A. Roku TV = A115X. Tried WiFi update and USB update. USB update fails,   WiFi update looks like it is working but it just reboots into Recovery Mode. Reset button doesn’t seem to do anything. 

Need Assistance?
Welcome to the Roku Community! Feel free to search our Community for answers or post your question to get help.

Become a Roku Streaming Expert!

Share your expertise, help fellow streamers, and unlock exclusive rewards as part of the Roku Community. Learn more.