Dan_1
Newbie

Roku wireless speaker issues

Jump to solution

Here's what I have: Roku Plus series 55"TV, Roku wireless soundbar, Roku wireless subwoofer, and 2 Roku wireless speakers.  My issue is with the wireless speakers.  I can't get sound from the right one and if we are watching an old movie on Classic Reels or TCM  the only sound is from the soundbar and subwoofer.  I've reset the wireless speakers, more than once, and reset the soundbar too.  Still no sound from the right rear wireless speaker, which is well within 30' from the TV/soundbar.  I've seen one UTube video where the guy said it was necessary to disconnect/reset everything then starting with powering up the TV add the soundbar, subwoofer, and speakers again, in that order.  Is that your advice too?  Would appreciate a step by step instruction on getting what should be a 4.1 surround sound system working.  And shouldn't we get sound from all of the speakers all of the time regardless of the source?

Thanks.  Dan Flanagan

Labels (1)
1 Solution

Accepted Solutions
RokuArjiemar
Community Moderator
Community Moderator

Re: Roku wireless speaker issues

Jump to solution

Hello! @Dan_1,

Thank you for your post in the Roku Community!

We appreciate you contacting us about your Roku surround system and your issues with Roku wireless speakers. We are pleased to assist.

When you initially paired your wireless speakers with your Roku TV system, you should have heard distinct audio from the left and right speakers. However, if after some time you find you only hear audio from one speaker, troubleshoot with the following steps.

  1. You can reset the speaker without audio by removing the power cable and plugging it back in or pressing the Reset button on the back of the speaker.
  2. After about a minute, the speaker will reconnect to your TV automatically.

If you still do not hear any audio from the speaker, proceed to the following:

  1. Reset your TV and both wireless speakers by removing the power cables, or use the instructions below:
    • On your TV, press Home on your Roku remote, then go to Settings > System > Power > System restart > Restart.
    • Press the Reset button on each of your wireless speakers.
  2. Wait a minute for your TV and wireless speakers to power up and reconnect automatically.

If the issue continues, try the steps below:

  1. You can factory reset your wireless speakers by pressing the Reset button on the back of each speaker for 10 seconds. If you prefer, you can also do so from the Roku interface. Go to Settings > Remotes & devices > Audio devices > Wireless speaker (Left) > Factory reset, and then repeat for Wireless speaker (Right). Read the article specific to factory resetting your Roku wireless speakers for detailed instructions.
  2. After a minute, your speakers will power up and begin reciting the setup instructions.
  3. Follow the instructions to pair your speakers again, or refer to the detailed article about setting up your Roku wireless speakers.

First, ensure the title you want to watch is in a surround sound format. When using the internal streaming player, look for indicators on the content itself, such as "5.1", "Dolby Digital Plus 5.1", "Dolby Surround," or "Dolby Atmos." For external content like a Blu-ray player or TV broadcast, check that your TV's digital audio output is set to Auto (or passthrough) and that the source is set up for surround sound. 

If the content does not explicitly say it is in surround, it likely is not. To hear audio from your wireless speakers in these cases, press the Star button on your Roku remote during playback and change the Expanded Stereo sound setting to one of the following choices:

  • Movies and TV: Makes stereo sound feel like surround sound
  • Music: Uses all speakers to fill your room with stereo sound
  • Off: Stereo sound only plays from the front speakers

For additional troubleshooting steps, please visit the following link: How to resolve audio playback issues on your Roku wireless speakers.

Thanks,
Arjiemar

Arjiemar
Roku Community Moderator

View solution in original post

0 Kudos
2 REPLIES 2
RokuArjiemar
Community Moderator
Community Moderator

Re: Roku wireless speaker issues

Jump to solution

Hello! @Dan_1,

Thank you for your post in the Roku Community!

We appreciate you contacting us about your Roku surround system and your issues with Roku wireless speakers. We are pleased to assist.

When you initially paired your wireless speakers with your Roku TV system, you should have heard distinct audio from the left and right speakers. However, if after some time you find you only hear audio from one speaker, troubleshoot with the following steps.

  1. You can reset the speaker without audio by removing the power cable and plugging it back in or pressing the Reset button on the back of the speaker.
  2. After about a minute, the speaker will reconnect to your TV automatically.

If you still do not hear any audio from the speaker, proceed to the following:

  1. Reset your TV and both wireless speakers by removing the power cables, or use the instructions below:
    • On your TV, press Home on your Roku remote, then go to Settings > System > Power > System restart > Restart.
    • Press the Reset button on each of your wireless speakers.
  2. Wait a minute for your TV and wireless speakers to power up and reconnect automatically.

If the issue continues, try the steps below:

  1. You can factory reset your wireless speakers by pressing the Reset button on the back of each speaker for 10 seconds. If you prefer, you can also do so from the Roku interface. Go to Settings > Remotes & devices > Audio devices > Wireless speaker (Left) > Factory reset, and then repeat for Wireless speaker (Right). Read the article specific to factory resetting your Roku wireless speakers for detailed instructions.
  2. After a minute, your speakers will power up and begin reciting the setup instructions.
  3. Follow the instructions to pair your speakers again, or refer to the detailed article about setting up your Roku wireless speakers.

First, ensure the title you want to watch is in a surround sound format. When using the internal streaming player, look for indicators on the content itself, such as "5.1", "Dolby Digital Plus 5.1", "Dolby Surround," or "Dolby Atmos." For external content like a Blu-ray player or TV broadcast, check that your TV's digital audio output is set to Auto (or passthrough) and that the source is set up for surround sound. 

If the content does not explicitly say it is in surround, it likely is not. To hear audio from your wireless speakers in these cases, press the Star button on your Roku remote during playback and change the Expanded Stereo sound setting to one of the following choices:

  • Movies and TV: Makes stereo sound feel like surround sound
  • Music: Uses all speakers to fill your room with stereo sound
  • Off: Stereo sound only plays from the front speakers

For additional troubleshooting steps, please visit the following link: How to resolve audio playback issues on your Roku wireless speakers.

Thanks,
Arjiemar

Arjiemar
Roku Community Moderator
0 Kudos
Ryanr11
Newbie

Re: Roku wireless speaker issues

Jump to solution

Arjiemar, 

I have a similar issue. I have a Roku TV with 2 Roku Wireless Speakers. I initially paired and set up the speakers without issue following steps provided. After a recent software update on the TV however, my speakers unpaired. I have followed all following troubleshooting tips I can find online and on these forums with no success:

1) Unplugging and plugging the speakers back in

2) Moving speakers closer to TV

3) Restarting Roku TV

4) Factory Reset on Wireless speakers

5) Factory reset on Roku TV

My Roku TV still will not re-pair to my wireless speakers

Current Setup:

Roku TV - Model: 65R4AX

Roku Wireless Speakers - Model: 9020X

 

0 Kudos
Need Assistance?
Welcome to the Roku Community! Feel free to search our Community for answers or post your question to get help.

Become a Roku Streaming Expert!

Share your expertise, help fellow streamers, and unlock exclusive rewards as part of the Roku Community. Learn more.