Did you try pushing the little reset button on the back of the little black box that goes between the power and the TV? That's what I had to do even though it is not described anywhere that I could see. Good luck!
I did unfortunately it didn't work
The identical problem as stated is also happening to me. I used my camera to examine the remote, and when I click a button, I can see the IR light within the device. Also, I have made sure that the device is easily visible. My Roku Express is brand-new out of the package. Also, I've tried everything to reset it. Any assistance? 3930X model; S00830DED2SS serial number
Hi @Ruthannnj @sandradhicks896,
Thanks for posting in the Roku Community!
We understand that you are facing an issue with the Roku device that is stuck in the language set up and we would like to know what went wrong so we can assist you further and fix the issue but we need more details.
Here are a few questions here to better understand what you're experiencing:
We look forward to hearing from you and looking closely into this issue. Thank you!
Best regards,
Mary
You might have to repair the Roku control with the roku. If you have a pairng button on the back of the remote where the batteries are you can press it for 5 seconds after resetting the roku. If its an older remote then reset the roku and press the home and top back arrow for 10 seconds and it should pair.
You probably just need to pair the remote with the roku. You can do that by either using the pair button on the back of the remote or by holding the home and large back arrow on the roku remote. Just do that right after resetting the roku.
Hey @RokuKariza-D I really need help with the control and it’s not working for me because I lost the original control from the Roku tv and I’m using one of the new versions of the Roku tv but it only turns off and on Can you please help me out
Have you tried pairing the remote?
@Andyhunter12 my daughter lost the original control but I bought a new one at target and it told me to press the home button and we’ll it work but then after I tried resetting my tv the control stopped working
anything else I can do ??