Remotes

Learn how to reset a Roku remote, how a Roku remote works, or pair a new remote.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Old71
Newbie

4K Streaming Stick Unresponsive after all recommended fixes

4k stick just 2 months old and becomes unresponsive every few minutes. Rebooted the stick, replaced batteries, repaired the remote and couldn’t even get through setup before going unresponsive again. Help!

0 Kudos
1 REPLY 1
RokuJharra-Q
Community Moderator
Community Moderator

Re: 4K Streaming Stick Unresponsive after all recommended fixes

Hi @Old71,

Welcome to the Roku community!

Thanks for reaching out about your Roku remote issue. We're happy to help and want to make sure you get everything working smoothly again!

 

Since this is your first time setting it up, we suggest resetting your Roku stick as the next step.

Please locate the physical Reset button, which can typically be found on the back or bottom of your device. This button may either be tactile or designed as a pinhole. Once you’ve identified the Reset button and ensured your Roku device is powered on, please press and hold the button firmly for about 10 seconds and pair the remote again. 

 

We also recommend trying the following steps to help resolve this issue:

Reboot your voice remote

If your voice remote uses standard AA or AAA alkaline batteries, you can reboot it by removing and reinstalling them.

  1. Remove the battery cover on the back of your remote
  2. Remove both batteries from the battery compartment
  3. Re-insert the negative (-) end of a battery first and then gently push the positive (+) end until the battery clicks into place
  4. Repeat the previous step to install the second battery
  5. Put the battery cover back on your remote

Re-pair your voice remote to your streaming device

If your voice remote has a pairing button, it will be located either on the back of the remote or under the battery cover. Press and hold the pairing button for 5 seconds or until you see the status light begin to flash.

If your remote doesn't have a pairing button, you can pair it by pressing and holding the Back and Home buttons for 5 seconds or until you see the status light starts flashing.

Try doing this and see if it helps with what you're experiencing.

Please keep us posted!

Thanks,
Jharra

Jharra Q.
Roku Community Moderator
0 Kudos
Need Assistance?
Welcome to the Roku Community! Feel free to search our Community for answers or post your question to get help.

Become a Roku Streaming Expert!

Share your expertise, help fellow streamers, and unlock exclusive rewards as part of the Roku Community. Learn more.