@Buzzathlon
You can certainly use the included drywall anchors and provided screws. Don't need a lot of strength, so just place some silicone/adhesive in the holes before placing anchor and should be fine. There are some better plastic anchors and screws in any hardware store. Personally, I'd probably go with a little bigger anchor and screw. Do not need any steel or lead masonry anchors for the weight of this camera. If you drill the holes into the vertical mortar (rather than the brick), also won't leave holes in your brick and can just patch the mortar at a later date if you ever remove cam. Run a little bead of clear silicone caulk around the attached base and shouldn't go anywhere.
Seems like people with Wyze cams have had success/recommend using Gorilla brand exterior heavy-duty adhesive tape as well for mounting to brick surfaces. Also sold at Home Depot and hardware stores. https://www.amazon.com/Gorilla-Heavy-Double-Mounting-Inches/dp/B019HT1U9E
Roku Community Streaming Expert
Just another Roku user... I am not a Roku employee.
Insignia RokuTV, Ultra 4660, 4802, 4850, Premiere+ 3921, Express 4k+ 3941, Streambar 9102
