Forum Discussion

88NotBob88's avatar
88NotBob88
Reel Rookie
4 months ago
Solved

Roku 43” TV wall mount options

Forgive the generic non technical question.

 I purchased this for putting on a wall hugger desk (whatever that is called); we have a small/tiny family room.  My wife (and me) now are wanting to get a wall mount bracket.

Would any of you have any suggestions, or even better a recommendation?

https://www.roku.com/products/roku-tv/roku-made-tvs/select-series-4k?srsltid=AfmBOopdIaEl0Zm39ooamwEfRaZcjuP_VphlyvROS-fZ5I9g_Wl6UMSQ

NotBob

  •  

    From the link provided by RokuRhea-V, at  https://support.roku.com/article/9943613630103 you can see the specs/requirements for 43" Select 43R4A5R mounting.

    You just need to locate a bracket with your preferred options (ie. fixed, tilt, rotate, swivel, extend, etc) that includes a mimimum "vesa 300 x 300" screw pattern and can support 15 lbs.

    Plenty of options on Amazon.  If you see something that says Max Vesa 600 x 400, that means includes 300 x 300 and includes adjustments up to 600 x 400.

    You can perform a search on Amazon for " 300x300 vesa wall mounts" and should get plenty of results to get you started.

    --------

    While I do not have any specific recommendations for this TV, I have used brackets similar to this one for mounting TVs (which offers full movement/adjusting  that allows for easy connections behind tv since you can just pull away  from wall a pretty good distance to get behind).  I have mounted these on tile fireplace walls , regular studded walls, and on exterior brick/stucco surfaces. (many of these mounts will come with cheap, chinese lag fasteners so for heavier TVs I would grab some better lags/fasteners from a hardware store or at least pre-dill if you use the original fasteners.)

    Mounting Dream TV Mount

3 Replies

  • AvsGunnar's avatar
    AvsGunnar
    Community Streaming Expert

     

    From the link provided by RokuRhea-V, at  https://support.roku.com/article/9943613630103 you can see the specs/requirements for 43" Select 43R4A5R mounting.

    You just need to locate a bracket with your preferred options (ie. fixed, tilt, rotate, swivel, extend, etc) that includes a mimimum "vesa 300 x 300" screw pattern and can support 15 lbs.

    Plenty of options on Amazon.  If you see something that says Max Vesa 600 x 400, that means includes 300 x 300 and includes adjustments up to 600 x 400.

    You can perform a search on Amazon for " 300x300 vesa wall mounts" and should get plenty of results to get you started.

    --------

    While I do not have any specific recommendations for this TV, I have used brackets similar to this one for mounting TVs (which offers full movement/adjusting  that allows for easy connections behind tv since you can just pull away  from wall a pretty good distance to get behind).  I have mounted these on tile fireplace walls , regular studded walls, and on exterior brick/stucco surfaces. (many of these mounts will come with cheap, chinese lag fasteners so for heavier TVs I would grab some better lags/fasteners from a hardware store or at least pre-dill if you use the original fasteners.)

    Mounting Dream TV Mount

  • RokuRhea-V's avatar
    RokuRhea-V
    Community Moderator

    Hey88NotBob88,

    Thanks for your inquiry!

    Just a heads up, there are types of wall mounts that we recommend for your 43" Roku Select Series TV:

    • Fixed Mount - The TV is mounted on the wall in a static position and cannot be moved
    • Tilting Mount - tilt the angle of your TV for better viewing
    • Full Motion Mount - tilt and swivel adjustment

    Please refer to the Roku mounting information.

    I hope this helps!

    Thanks,
    Roku Community Team

    • 88NotBob88's avatar
      88NotBob88
      Reel Rookie

      Thank you for your reply.  However, no mounts the 43”.

      • Full Motion Mount - tilt and swivel adjustment

      n