@mikew_nt Is this with any changes to anything like disabling sleep or changing anything in the secret HDMI menu like automatic recovery? I have not changed anything and still get the HDCP error, so I'm going to try disabling automatic recovery next.
Nope, I've not messed with any secret settings or anything, the sleep thing remains mysterious and seems to work backward. I couldn't even tell you what it's set on, except I've not changed it between 12.5.5 and 13, and the HDCP errors haven't shown up (yet).
If we need to be changing anything detailed, it should really be Roku figuring it out and giving us workarounds.
This constant debugging and experimenting on a problem that has been around since 2022 is just absurd. Roku could send ME an HDMI analyzer and I could probably figure it out and determine the issue faster than they seem to care to do.
Post 13 update, errrr, update -
Immediately had intermittent sound issue. Workaround on that still works - play in headphone mode through the Roku app on my phone for 30s or so then swap back to TV sound.
Inside the first 60m of watching I had already encountered the splash screen HDCP error that then resolved itself twice. Later, I got an unrecoverable HDCP error. I was furious - unplugged and have yet to plug back in.
Very frustrated with the lack of response from Roku.
Disabling automatic recovery in the hidden HDMI menu alone didn't fix anything for me. Already got HDCP error. Going to try disabling auto power savings next.
Well none of the HDMI Secret Screen settings made any difference for me. Still getting HDCP error.
By the way, here is what is reported by Roku in that screen when the error happens:
MFG: @@@ PRDCT: 0 SN: 0 NAME: NO EDID TV
Supports 4K@60Hz: No
Supports 4K@30Hz: No
Supports 1080p: No 1080i: No
Supports 720p: Yes
Supports 10-bit: YCC420: No YCC444: No
Supports 4KHDR: 60: No 30: No
HDCP Status: Unauthenticated
HDCP Version: UNKNOWN
Compared to what it reports when things are working:
MFG: SAM PRDCT: 29503 SN: <hidden by me> NAME: QCQ90S
Supports 4K@60Hz: Yes
Supports 4K@30Hz: Yes
Supports 1080p: Yes 1080i: Yes
Supports 720p: Yes
Supports 10-bit: YCC420: Yes YCC444: Yes
Supports 4KHDR: 60: Yes 30: Yes
HDCP Status: Authenticated
HDCP Version: 2.2
I'm curious if everyone who is consistently having the issue is using arc/earc also. It seems like the Roku is ok when my tv first turns on. When my Denon AVR turns on, the Roku video blanks out and then returns and the hdcp error starts and 720p video instead of 4k.
I do not like this. I need a step by step solution
Hi Community users,
Thanks for posting here in the Roku community!
We see that you're experiencing the "HDCP Error Detected" issue on your Roku player, and we're here to help you resolve it.
If you encounter the "HDCP Error Detected" message or a purple screen while attempting to stream 4K UHD or HDR content on your Roku player, please review the instructions and requirements for:
If you see either error screen when attempting to watch any content on your Roku player, perform the following set of steps to help resolve the issue. To troubleshoot issues with your Roku player and TV, AVR, or soundbar, follow these steps:
Hope you'll find this info useful. Let us know in case you still have any questions.
Best regards,
Jharra
No HDCP error for a few days since running Roku to AVR and not using eARC (but I lose HDR10+ on my older AVR this way). It seems like Roku doesn't handle the handshake with arc/earc correctly.
In the meantime I was able to get an Apple TV 4k on sale recently and haven't had a single HDCP error with eARC. I still prefer the Roku remote but I am out of ideas on how to solve the issue.
I don't think it is solvable. I believe it is a fundamental issue with the 4802 hardware - the complete lack of support, troubleshooting or feedback from Roku pretty much confirms it.
I've given up - every other device works without issue - its only the 4802 that has the problem.