Solving playback issues

Find troubleshooting tips and resources for Roku playback speed issues, HDCP messages, power issues, and more. Join the community discussion for assistance.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Merlin01
Newbie

Need to unplug Roku from power to get it working. The simple solution.

Jump to solution

I discovered by accident, If TV starts, but not Roku, just hit the home button on your remote. Solved my issue. 

1 Solution

Accepted Solutions
makaiguy
Community Streaming Expert

Re: Need to unplug Roku from power to get it working. The simple solution.

Jump to solution

A "Power" item has been added in the "Settings > System" menu for some of the newer Roku device models. At this writing they are Streaming Stick 4K/4K+ (3820/3821), Express 4K/4K+ (3940/3941), Roku 4 (4400), and Ultra/Ultra LT (4800/4801). You can check your model and model number via Roku menu path Settings/System/About.

If you have one of these models, the "Auto power savings" item in the Power menu will put your Roku device into a low power standby condition after a 20 minute period of inactivity (i.e nothing has been streaming and no user interaction has been received). In this low power state neither its connection to your home network nor its HDMI connection to your TV are active. If your TV was off and you turn it back on while the Roku is in this state, this often leads to a "no connection" error display on the TV, and on some TVs can lead to HDCP copy protection errors and other connection problems when the HDMI connection is reestablished.

Pressing a Roku control key (like the Home button) on your Roku remote (not Power, Volume, or Mute buttons, if your remote has them, as they act on the TV, not the Roku) should bring the Roku out of standby and back to full operation. Pulling the power for a few seconds to restart the Roku will restore full operation as well.

If you disable "Settings > System > Power > Auto power savings > After 20 minutes of no interaction" it should prevent your Roku from going into standby in the first place. The power savings are very small and for the hassle it causes many users, I don't think it's worth having this feature activated.

For further details, see this Roku information page: https://support.roku.com/article/6306527767575

Roku Community Streaming Expert
I am not a Roku employee, only a user like you.  Please, no support questions via private message -- post them publicly to the Community where others may benefit as well.
If this post solves your problem please help others find this answer by clicking "Accept as Solution.".

Ultra 4800 | Streaming Stick 4K+ 3821 | TCL Roku TV 43S245/C107X

View solution in original post

2 REPLIES 2
makaiguy
Community Streaming Expert

Re: Need to unplug Roku from power to get it working. The simple solution.

Jump to solution

A "Power" item has been added in the "Settings > System" menu for some of the newer Roku device models. At this writing they are Streaming Stick 4K/4K+ (3820/3821), Express 4K/4K+ (3940/3941), Roku 4 (4400), and Ultra/Ultra LT (4800/4801). You can check your model and model number via Roku menu path Settings/System/About.

If you have one of these models, the "Auto power savings" item in the Power menu will put your Roku device into a low power standby condition after a 20 minute period of inactivity (i.e nothing has been streaming and no user interaction has been received). In this low power state neither its connection to your home network nor its HDMI connection to your TV are active. If your TV was off and you turn it back on while the Roku is in this state, this often leads to a "no connection" error display on the TV, and on some TVs can lead to HDCP copy protection errors and other connection problems when the HDMI connection is reestablished.

Pressing a Roku control key (like the Home button) on your Roku remote (not Power, Volume, or Mute buttons, if your remote has them, as they act on the TV, not the Roku) should bring the Roku out of standby and back to full operation. Pulling the power for a few seconds to restart the Roku will restore full operation as well.

If you disable "Settings > System > Power > Auto power savings > After 20 minutes of no interaction" it should prevent your Roku from going into standby in the first place. The power savings are very small and for the hassle it causes many users, I don't think it's worth having this feature activated.

For further details, see this Roku information page: https://support.roku.com/article/6306527767575

Roku Community Streaming Expert
I am not a Roku employee, only a user like you.  Please, no support questions via private message -- post them publicly to the Community where others may benefit as well.
If this post solves your problem please help others find this answer by clicking "Accept as Solution.".

Ultra 4800 | Streaming Stick 4K+ 3821 | TCL Roku TV 43S245/C107X
techhead51
Binge Watcher

Re: Need to unplug Roku from power to get it working. The simple solution.

Jump to solution

I have 4 roku ultra,  4640x 12.0.0 4181 -29,  4800x 12.0.0 4181-c2 and two 4802x 12.0.0 4181-c2, no issues on the 4640x but the other three devices,  the power off after 20 minutes is still not working,  5 minutes for screen saver,  20 minutes later the connected avr and tv power off,  but the roku does not stay off, I can see the power light come back on., the only option is to turn it off 

0 Kudos