Roku setup

From linking a device to your account to adding channels, find Roku setup troubleshooting help and activation support from our community support forum.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Ctgregory
Reel Rookie

Will not update software during setup

Jump to solution

During setup the roku express will link up to the wifi and then immediately goes to a software update page.  From there it restarts and asks for the wifi password confirmation and back to the software update page again.  I can’t find any kind of direct link to Roku to check what I’m doing and make sure I have not done anything wrong. 

0 Kudos
1 Solution

Accepted Solutions
renojim
Community Streaming Expert

Re: Will not update software during setup

Jump to solution

You haven't done anything wrong.  The first thing to try is a different power source.  If you're using the TV's USB port for power try using a USB power adapter from a phone or tablet.  Look for one that has fine print that says something like, Output:  5V 1A (or 1000mA).  More than 1 Amp is better, but less is not good.

Roku Community Streaming Expert

Help others find this answer and click "Accept as Solution."
If you appreciate my answer, maybe give me a Kudo.

I am not a Roku employee.

View solution in original post

3 REPLIES 3
renojim
Community Streaming Expert

Re: Will not update software during setup

Jump to solution

You haven't done anything wrong.  The first thing to try is a different power source.  If you're using the TV's USB port for power try using a USB power adapter from a phone or tablet.  Look for one that has fine print that says something like, Output:  5V 1A (or 1000mA).  More than 1 Amp is better, but less is not good.

Roku Community Streaming Expert

Help others find this answer and click "Accept as Solution."
If you appreciate my answer, maybe give me a Kudo.

I am not a Roku employee.
Ctgregory
Reel Rookie

Re: Will not update software during setup

Jump to solution

That fixed it right up. Thanks!

0 Kudos
makaiguy
Community Streaming Expert

Re: Will not update software during setup

Jump to solution

@Ctgregory-

[You replied while I was researching and writing this reply.  I'm glad you got it fixed.  I'll leave this reply for the benefit of others who may find this thread.]

The second thing to try is connecting to a different network via Settings > Network > Set up connection to do the update and see if it will complete the startup; - perhaps via a WiFi hotspot on your mobile phone or by taking it to a friend's house. If successful, then redo the network connection to use your intended network via Settings > Network > Set up connection.

Roku Community Streaming Expert
I am not a Roku employee, only a user like you.  Please, no support questions via private message -- post them publicly to the Community where others may benefit as well.
If this post solves your problem please help others find this answer by clicking "Accept as Solution.".

Ultra 4800 | Streaming Stick 4K+ 3821 | TCL Roku TV 43S245/C107X
0 Kudos
Need Assistance?
Welcome to the Roku Community! Feel free to search our Community for answers or post your question to get help.

Become a Roku Streaming Expert!

Share your expertise, help fellow streamers, and unlock exclusive rewards as part of the Roku Community. Learn more.