Discussions

[eme61]

I have an HDTV antenna plugged into new Roku 50 inch TV and used it to watch local channels via Antenna icon on the home page.

Since adding a Roku streambar, Antenna is no longer showing up in the home  page choices, and TV inputs is not showing up as a choice in Settings.  Actually when I turn the TV on, Antenna  shows up momentarily, than there is a message "Switching to Soundbar", then a message "No signal, is it on?" (it IS on), then the home  page changes and Antenna is no longer there as an option and TV input is no longer an option in the Settings menu for me to see the different inputs and select Antenna. 

Double checked and everything is connected just like before adding the soundbar.

[renojim]

You're probably seeing the Home Screen of the Streambar, not the TV.  You can either use the TV's remote to get back to the TV (press Home on the TV's remote) or go into Settings->System->Control other devices and uncheck "1-touch play" using the Streambar's remote.  The TV should then power up the way it did before adding the Streambar.

It can get confusing with a Roku device connected to a Roku TV since you pretty much have to juggle two remotes.  You might want to use different themes (Setting->Theme) on the TV vs the Streambar to make it obvious which Home Screen you're seeing.

[eme61]

Thanks

Pressing Home on the TV remote didn't work so unchecked "1-touch play" as suggested.  When TV powered back up, I did get the home screen with antenna, BUT, neither remote works to navigate anywhere; nothing happens when pressing any navigation button, HOME just stays lit up.  The only control that works is power control to turn off the TV.  Weirder and weirder!  Now cannot watch anything, just a frozen HOME screen

[eme61]

Thanks renojim  (I love Reno area btw)

It is confusing yeah.  After unchecking 1 touch play, and restarting both remotes only worked to power on and off, tv was frozen on home screen.  Then I unplugged both streambar and tv, turned tv on with tv remote and paired it to tv.  All works now, antenna and tv inputs showing up.  Soundbar working.

Soundbar remote not working even after attempting to  pair (though I did not go through "adding another remote").  Why do I need the soundbar remote at all if the tv remote works and the soundbar works?  Does it control the soundbar settings in some way that is not available with the tv remote? 

I will be adding roku wireless speakers soon, hope that doesn't further complicate things.

[renojim · Accepted solution]

@eme61, as long as you're getting sound through the Streambar and your TV remote controls its volume, then you really don't need to use the Streambar's remote.  I think there may be volume modes that the Streambar supports that you'd need its remote to enable or control, but I'm not even sure of that.  I have a Streambar connected to my TV, but I don't use any of the volume modes and I hate to say it, but I haven't really looked into its capabilities.  I get sound out of it and that's good enough for me.  🙂

Some people have had issues with the Roku embedded in the TV, so they rely on the Roku embedded in the Streambar for their streaming and use the TV for antenna TV or to switch to other connected devices.  As long as you're not having any issues you can probably ignore the Streambar remote for now.  I don't have the wireless speakers, so I'm not sure how all of that works.  Good luck!

[Robin8]

I am having the same exact problem. I have a Roku TV, and added one of those Roku soundbar or stream bar. I'll check your answers. 😊

[Robin8]

So you really didn't answer the question. 

How can we get TV Inputs to show up in the Settings menu? If I have that information, then I think I can figure the rest. 😏

[renojim]

@Robin8, TV Inputs will only show up in the TV's settings.  If you're using the Streambar's remote then you're seeing its settings.  There's no way to get the TV Inputs to show up there.