Forum Discussion

warner178's avatar
warner178
Newbie
6 years ago

I have a TCL ROKU TV. How do I pair my Xfinity remote?

svsekaran's avatar
svsekaran
Newbie
6 years ago

the codes (TCL,Admiral, etc) didn't work for me, but this did (for volume, power, and input buttons) !

 

If it has a Setup button:

  1. Turn on your TV.
  2. Press and hold Setup until the light at the top of the remote changes from red to green.
  3. Enter 9-9-1. The light should flash green twice.
  4. Keep pressing CH ^ until the TV turns off.
  5. Once the TV turns off, press Setup to lock in the code.
  6. Press the TV power button on the remote. If the TV turns on, you're all set!

from: https://www.xfinity.com/support/articles/programming-your-xfinity-remote

tcl 55r617

xfinity XR11 remote

  • Tivoburkee's avatar
    Tivoburkee
    Community Streaming Expert
    6 years ago

    Help others, blink back the working code and post it here?

    1. tv

    2. press and hold SETUP for two blinks, release

    3. enter 9 9 0

    4. press 1 key, count the blinks

    5. press 2 key, count the blinks

    6. press 3 key, count the blinks

    7. press 4 key, count the blinks

    8. press 5 key, count the blinks

  • MP17315's avatar
    MP17315
    Reel Rookie
    5 years ago

    Worked great for my TCL 49 and my xr2 remote ty .,♏☮️

     

  • mmccky's avatar
    mmccky
    Newbie
    5 years ago

    Worked for on/off and volume, but not for selecting cable channel.  Not very useful.

  • lifeofpisces319's avatar
    lifeofpisces319
    Newbie
    5 years ago

    While the TV power and volume work, the channel up and down do not. Neither does the guide button or the numbers.

    • RokuKariza-D's avatar
      RokuKariza-D
      Retired Moderator
      5 years ago

      Hello lifeofpisces319

      Thanks for posting here in the Community!

      Could you try re-pairing your remote to your Roku? Here's how:

      1. If your remote uses standard batteries, open the battery compartment and remove the batteries.
      2. Remove the power cable from your Roku device, wait 5 seconds and then reconnect the power cable.
      3. Wait until your Roku device displays the home screen.
      4. Restart your remote.
        • Standard batteries: Reinsert the batteries into your remote.
           
      5. Press and hold the pairing button for 5 seconds until you see the status light begin to flash. If the light does not flash, try again. If the light still does not flash, charge your remote or replace the batteries.
      6. Wait for 30 seconds while the remote establishes a connection with your Roku device.
      7. The remote pairing dialog should appear on your TV screen.

      Feel free to visit this link for more remote troubleshooting steps: How do I resolve issues with my Roku® voice remote?

      Let us know how it goes.

      All the best,
      Kariza