Discussions

Is your Roku TV not working? Join our online community forum to find help with common Roku TV issues, get troubleshooting tips, and share your experiences.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
SentientOne
Reel Rookie

Adding OTA local stations manually on Roku TV

Jump to solution

When I do a channel scan for OTA local channels on my Roku TV not all channels appear. Using the same antenna I can pick up more channels on other TVs. It is possible to "Hide" channels, but I see no way to add missing channels. On a regular TV I would just tune to the desired channel using the number pad and adjust the antenna for good reception even if the channel scan did not find it initially. The Roku TV has no number pad and I can't figure a way to manually add an OTA channel. Any suggestions?

1 Solution

Accepted Solutions
SentientOne
Reel Rookie

Re: Adding OTA local stations manually on Roku TV

Jump to solution

I see RokuDanny has gone off the grid with no answer. Maybe he doesn't understand the question. Or perhaps the real answer is "NO, Roku TV does not have the capability to manually add channels because we didn't really think this through before selling our TV...  and Oh, ya... the remote IS poorly designed with the volume/mute buttons on the side where you keep inadvertently hitting them when just holding the remote. Sorry."

View solution in original post

15 REPLIES 15
RokuDanny-R
Retired Moderator

Re: Adding OTA local stations manually on Roku TV

Jump to solution

@SentientOne

Thanks for the post.

We would recommend taking a look at the information provided by our Support page here: Set up the Live TV input

Please keep us posted what you find out.


Thanks,
Danny

Danny R.
Roku Community Moderator
0 Kudos
Roger9
Reel Rookie

Re: Adding OTA local stations manually on Roku TV

Jump to solution

I'm facing the same challenge.  I tried the suggested How do I set up the Live TV input on my Roku TV™? without success. I would like to add missing OTA channels and then figure out how to reorient my rabbit-ears antenna to get a good reception.

RokuDanny-R
Retired Moderator

Re: Adding OTA local stations manually on Roku TV

Jump to solution

@Roger9

Thanks for the post.

Please be aware that if you haven't already tried the troubleshooting steps provided by our Support page online, then the channels shown on the Roku TV is all of the channels that the antenna is detecting. Have you tried moving the antenna to another location to see if you are able to detect more channels on the Roku TV?

Please keep us posted.


Thanks,
Danny

Danny R.
Roku Community Moderator
0 Kudos
Roger9
Reel Rookie

Re: Adding OTA local stations manually on Roku TV

Jump to solution

Yes. I have moved the antenna around and tried several different locations and orientations within my home. I get mixed results.

FYI -- Back in the day (1960s), TV sets came with 12 channels. I would connect the rabbit ears to the TV set and move the antenna around to get the best reception of the TV stations that were in my geographic area. With Roku as it is now designed, if the antenna does not detect the station, then as far as the Roku TV is concerned, the TV channel does not exist. As I move the antenna around and rescan the OTA channels, the available channels detected by the Roku TV come and go. I have found this effort to be an exercise in frustration.

I know the TV stations exist because I can pick them up on my Windows laptop using the Hauppauge WinTV-dualHD dual tuner. What I am asking Roku to do is to add the capability for me to specify manually the OTA channels I want to receive. Then I can try re-orienting the rabbit ears as necessary to get the best reception for the channels I want to watch.

P.S., OTA signal strength can vary with weather. I can scan the OTA channels today with my Roku TV and get a certain result. If I rescan tomorrow, I might get a different result. By watching the signal bars on the channels I get, I notice a strong signal today may be a weak signal at other times due to the weather. With the ability to specify OTA channels manually, I know the Roku TV is programmed to process those particular channels. I eliminate one element of uncertainty this way. Than I can deal with the other element of uncertainty of weak or strong OTA signals based on antenna orientation and the weather at the moment.

SentientOne
Reel Rookie

Re: Adding OTA local stations manually on Roku TV

Jump to solution

See... Roger9 gets it! Exactly.

0 Kudos
Eangloher
Newbie

Re: Adding OTA local stations manually on Roku TV

Jump to solution

Hi Roku Danny, 

       None of your advice has actually answered the question nor really addressed the fact that the customer response was the channels do exist and are being received as proof that other tvs are seeing it.So to Reiterate the question that I to the problem I am also experiencing is,” Is there a way to manually add an OTA channel Manually?” Or do I take this “sorry I ever bought it TV back and get my good old LG?

Roger9
Reel Rookie

Re: Adding OTA local stations manually on Roku TV

Jump to solution

I find the OTA TV channels in my area with Local TV Guide ( https://www.ontvtonight.com/guide/ ). I enter my zip code and get the list.

I don't expect my Roku TV set to pick up all of these channels with a TV antenna, but I want to be able to enter manually the channels I want to watch and then figure out how I have to orient the rabbit ears to pick them up.

cwcheese
Roku Guru

Re: Adding OTA local stations manually on Roku TV

Jump to solution

Rogers, it seems you want to do something that isn't really possible with modern ATSC tuners. I too remember the 60s and how we could reorient the antenna and/or the TV itself to detect those lower power signals. I've noticed the current digital tuners for the most part are limited to the autoscan detection, no software has been coded to allow user input of channels, as I too wish to sometimes try for a low signal channel. 

Have you checked out antennaweb.org or other websites to look at location maps where TV towers are located in relation to your home?  Do you have the ability to install an outdoor antenna with a motorized rotator? That may give you sort of what you need, but you'd have to continually rescan after changing the vector of your antenna.

don't call me expert, just a long time Roku user that seen a lot of things
0 Kudos
Roger9
Reel Rookie

Re: Adding OTA local stations manually on Roku TV

Jump to solution

cwcheese, an outdoor antenna with a motorized rotator is a major commitment with no guarantee it is needed or will work.

My Roku TV knows my zip code because I entered it manually. I want Roku to download the Local TV Guide to populate the list of channels licensed to operate in my area. Whether a list of channels comes from OTA scanning or FCC authorization should make no difference to an ATSC tuner. I can then explore each channel to determine if I can receive it OK and then select or deselect the channel as needed.

Once I settle on my list of favorites and orient my rabbit ears appropriately, I can channel-surf these stations to my heart's delight. If I cannot get a particular channel on a bad weather day, so be it. But at least I know the channel is there for a good weather day.

Need Assistance?
Welcome to the Roku Community! Feel free to search our Community for answers or post your question to get help.

Become a Roku Streaming Expert!

Share your expertise, help fellow streamers, and unlock exclusive rewards as part of the Roku Community. Learn more.