Cameras & doorbells

[Toni9]

I moved my indoor camera to another room how do I set it back up 

[RokuRiamie-D · Accepted solution]

Hi @Toni9,

We're happy to have you here in the Roku Community!

Sure, here is the revised text:

We are happy to provide you with a step-by-step guide for setting up your Indoor Roku Camera SE. If you move your Roku camera to another room without disconnecting it from the internet, you won't need to set it up again. However, if it gets disconnected from the internet, you will need to reset it. Here's the process for setting it up again:

Before you get started, make sure your smartphone or tablet is connected to your 2.4GHz Wi-Fi network (e.g., MyNetwork_2.4GHz).

1. Add your camera:

• Launch the smart home app
• Tap the plus sign from the navigation bar and select Add Device
• Select Cameras & doorbells and choose Indoor Camera
• Make sure your camera is powered on and the status light is flashing red, and then tap Next
• Press the Setup button on the bottom of your camera and listen for "Ready to connect". When you hear the phrase, check the box and tap Next.

2. Connect to Wi-Fi:

• Your 2.4GHz wireless network should be listed in the Wi-Fi network name pull-down
• Learn how to identify and connect to your 2.4GHz network
• Enter your password and tap Next

3. Scan QR Code:

• Hold your camera about 5 inches from the QR code and listen for "QR code scanned. Please wait.". When you hear the phrase, check the box and tap Next.
• Learn what to try if your camera cannot scan the QR code

4. Finish Setup:

• After you hear “Setup completed”, the status light turns solid blue and your camera is ready to use
• Name your camera and press Finish

For more details, visit our support article on how to set up your Roku Indoor Camera SE.

We hope you find this information helpful.

Regards,
Riamie