Voice Remote Pro v.2.- Charging
Received my new remote yesterday. It has been changing for over 20 hrs. White light blinking still. Occasionally, the light goes out but I can watch it a while and it starts blinking white again. All this time and still no green light.
Not a great start. Haven't even paired or used it yet. What is happening? Is it defective right out of the box or is this normal?
Thank you for posting here in the Roku Community, CGC!
We appreciate your interest in using your Roku Voice Remote, 2nd edition. Rest assured, we are here to assist you with any questions or support you may need.
To begin, please review the following tips about charging your voice remote.
- Your Roku device displays an on-screen message when the rechargeable lithium-ion battery in your remote is getting low on power
- Your voice remote can be used while charging
- The status light flashes slowly when charging and turns solid when complete
After charging the remote completely, pair it with your Roku device or TV. Then, follow these steps to restart your streaming device.
- Remove the power cable from your streaming device
- Wait at least 5 seconds
- Re-connect the power cable
- Wait for your streaming device to power on, and the Home screen to appear on your TV
- On your remote, press and hold the Back and Home buttons for 5 seconds, or until you see the status light begin to flash.
If you have the Roku mobile app installed, or another Roku remote that works with your streaming device, use the following steps to put your device into pairing mode from the Settings menu.
- Press Home on your working remote or from the Roku mobile app
- Scroll and select Settings
- Select Remotes & devices
- Select Add devices
- Select Remote
- Select Continue
- Follow the on-screen instructions to pair your voice remote
Note: Roku Voice Remote Pro (2nd edition): From empty, a full charge takes 5.5 hours and typically lasts 3 months.
Hope this helps!
Thanks,
JharraThank you for sharing your post in the Roku Community, dae1!
We would like to take a moment to clarify the meanings behind the Roku light indicators:
- A pulsing white light indicates that the device is currently charging while plugged in.
- A solid white light signifies that the device is fully charged when it is connected to power.
- A blinking red light gently reminds the user that the device is low on power and should be charged soon.
- A blinking white light signifies that the device is in pairing mode.
Please note that as the battery approaches 100%, the charging rate may slow down. This can result in the light continuing to pulse even when the device is fully charged. If the settings show 100% or indicate a full charge, everything is functioning properly.
Hope this clarifies things! If you have any other concerns or inquiries, please let us know.
Thanks,
Jharra
