Roku ultra audio settings
Just set up a roku ultra and and bugged by how the audio is behaving. I have a surround system and when the audio on the roku is set to Auto, every show says Atmos. When I set the roku audio option ...
Forum Discussion
"Auto passthrough" is the best option - it will show DD+ for most content, even Atmos (streaming services use DD+/Atmos) and for DD-only legacy systems, will transcode DD+ to DD.
"Auto detect" is actually "Auto transcode" - it will transcode all non-DTS output to the highest supported Dolby Audio level of the connected device (if thats PCM MAT 2.0/Atmos, then thats what everything is output at).
Try restarting all devices in the HDMI chain (Roku/TV/AVR) after making the change to "Auto passthrough".
StreamerUser Appreciate the response. Are you saying that I can’t play atmos unless I force atmos on everything? That I have to go back and forth maybe? That’s seems kinda ridiculous no?
And not sure why I might need to reset devices, unless, that will make true passthrough work correctly?
Not saying that at all - you may want to re-read my previous post.
The suggestion to restart (or unplug/replug) is to reset the HDMI chain (EDID issues abound) since you were stating you were getting everything as DD+ in Auto passthrough mode (you shouldnt be).
I also want make clear the Atmos you get from streaming services is DD+/Atmos (so it should be detected as DD+ by your AVR/soundbar, with Atmos). You should be getting PCM 2.0 as PCM 2.0, DD as DD, etc.
Put it in Auto passthrough and do some tests: NetFlix/Prime/Hulu/Disney+ output 5.1/Atmos in DD+, so all those should come through as DD+.
The Roku Channel and Apple TV output all (non-Atmos) 5.1 as DD. Paramount+ defaults to PCM 2.0, but can be configured for DD+ or DD output using Options (*) during playback.
If your AVR/Soundbar shows DD+ using Auto passthrough for all content (2.0/5.1) on all the apps/services I mentioned, then the most likely reason is that your AVR/soundbar (or whatever the Ultra is connected to) is applying some surround processing/upmixing, or alternately there is an EDID issue such that your AVR/soundbar/device is only advertising DD+ capabilities.
Highlight Settings/Audio/HDMI/Auto passthrough to see what codecs/formats the Roku detects your AVR/Soundbar/TV as supporting.
