Forum Discussion
I bought a new modem, and now my Roku Streaming Stick 4K is stuck on the "choose your network" or Error 003 "Can't update" screens. The correct network name is on the list, I get two green check marks for connection, and then it can't update software and goes back to the "choose your network screen".
I tried other suggestions that I saw here, e.g. held buttons down on the remote, rebooted the TV, the modem, and the Stick, took batteries out of the remote, reset the stick, no change.
The router's dashboard shows it is broadcasting a 2.4 GHz signal, the Streaming Stick 4K is Model 3820X ans s/n #S08Y41C58#
Help!
Thanks for the reply, Karla.
You wrote: "Support page here: What to do if your Roku streaming device is unable to update software | Official Roku Support "
That link goes to a blank page in Safari v 13.1.2, but it worked in Firefox v112.0.1. Just FYI.
- ranbush3 years agoChannel Surfer
I looked at that Support page again (I also found it yesterday), but the suggested remedies are not working for me.
I reset the Streaming Stick again, but it didn't make a difference.
The only menu I see is the "choose network" process. I went through it again just now, and Roku sees my network, I get two green checks for network and internet, but I still get "Error 3" and then I can't get back to the Home menu, or Settings. The remote won't do anything except "choose network".
How do I get out of the "choose network" loop, and get to the Home menu or Settings?
- Anonymous3 years ago
Hi ranbush
Welcome to the Roku Community!
If your Roku device is stuck on the "Choose your network" screen and you are unable to exit the loop even after resetting the device, here are a few troubleshooting steps you can try:
- Check your Wi-Fi signal strength: Make sure your Roku device is within range of your Wi-Fi network and the signal strength is strong enough for the device to connect. You can check the Wi-Fi signal strength on your Roku device by going to Settings > Network > About.
- Restart your router: Try restarting your Wi-Fi router by unplugging it from the power source, waiting for about 30 seconds, and plugging it back in. This may help resolve any network connectivity issues.
- Change your network security type: If your Wi-Fi network uses WPA2-PSK (AES) security type, try changing it to WPA-PSK (TKIP) security type or vice versa. This may help resolve any compatibility issues between your Roku device and your Wi-Fi network.
- Factory reset your Roku device: If none of the above steps work, you can try performing a factory reset on your Roku device. To do this, press and hold the Reset button on the back of your Roku device for about 15 seconds, or until you see the Roku logo on your TV screen. Once the device has reset, you can set it up again and try connecting to your Wi-Fi network.
We hope it helps!
Warm Regards,
Lianna- ranbush3 years agoChannel Surfer
Lianna wrote: "You can check the Wi-Fi signal strength on your Roku device by going to Settings > Network > About."
No, I CAN'T get to Settings > Network > About. I am stuck on the "choose network" menu and Error 3.
Lianna wrote: "Restart your router"
I have restarted the router three times. No change.
Lianna wrote: "Change your network security type: If your Wi-Fi network uses WPA2-PSK (AES) security"
I am using WPA2-PSK (AES). The modem-router does have WPA-PSK [TKIP] + WPA2-PSK [AES] but it made no difference.
Lianna wrote: "Once the device has reset, you can set it up again and try connecting to your Wi-Fi network. "
No, I CAN'T do that because the Roku returns to the "choose network" menu, finds my network, displays "are you in a dorm or hotel room?", then displays two green checkmarks, and then Error 3 again. I have reset the Roku 5-6 times. No change. For four days now.
My desktop computer, my laptop computer, Xfinity TV, Pandora, all other apps can connect to the Internet with the new Netgear C7000 modem-router. Only the Roku stopped working.