From linking a device to your account to adding channels, find Roku setup troubleshooting help and activation support from our community support forum.
Using Roku Express4K+ as video source for HDMI encoder and decoder
I have a set of HDMI encoders and decoders for an IPTV network setup. I have purchased and set up Roku Express 4K+ for my video sources on the encoders. My issue is I cannot get the decoders to receive video from the encoder when the roku is plugged into the encoder. I also have a NVR for a camera system. When I plug the HDMI into the video source on the encoder the decoders pick up the video from the NVR no problem letting me know the encoders and decoders are communicating properly at least for the NVR to function. However, as soon as I plug the roku back into the input on the encoder the decoders lose the video on the television.
Re: Using Roku Express4K+ as video source for HDMI encoder and decoder
That I can't say. The best I can offer is the encoder must accept a 720p/1080p/2160p input signal with DHCP 2.2 protection enabled. Any other resolution and it won't sync with the Roku.
Dan
Roku Community Streaming Expert
Help others find this answer and click "Accept as Solution." If you appreciate my answer, maybe give me a Kudo.
