Roku Ultra with an older HD plasma TV with 1080i resolution
Can you explain in more detail what connection you enabled and how you did it?
Forum Discussion
Sorry, it's been so long that I don't remember the details. I only remember that the second converter device I tried did work, well enough. I'm still using it.
Hello bjtalbot1
Thanks for getting in touch with us here at Roku.
We do not have enough details from your original message to make an effective suggestion. Could you tell us more about your concern?
Please keep us posted with the details.
Regards,
Karla
I have a Sony Grand Vega LCD Projection HD-TV, model number KDF-42WE655... that will take 1080i resolution input. I'm trying to use it with a ROKU 4, Model #4400X.
We had it working using an EASYCEL HDMI to S-Video RCAConverter. I did this set-up because I didn't notice that there was a HDMI connector in the back of the TV.
We then moved the TV to another room... and I saw the HDMI input connector, so I connected the TV to the ROKU4. It doesn't see a signal when I connect the ROKU 4 to the TV. I cannot get a signal when using the converter either... but I think I may have damaged the converter.
I read that ROKU does not support 1080i -- is that true?
I just called Sony, and they said I should be able to connect the ROKU or any streaming device directly to the HDMI connector and it should work. I plan on trying it again, attaching the connections in a particular sequence... and turning both the TV and the ROKU in the suggested order.
Thank you for your help.
From an older posting in the Community, looks like some Roku devices supported 1080i, but the Roku 4 (4400) does not support 1080i output.
https://web.archive.org/web/20201112004140/https://forums.roku.com/viewtopic.php?t=109961
-----
If cycling through the Sony HDMI inputs does not produce a signal, then try Factory Resetting the Roku 4400 and during setup, do not use "Auto Detect" for your Display Setting, but try manually selecting 720p. (Make sure you have a working Roku remote before performing factory reset of any Roku device).
If your converter is still having issues, perhaps consider replacing its power adapter.
-----
Maybe the TV simply just switched inputs during the moving of the TV. Use the Sony Remote and carefully/slowly cycle through the Source/Inputs and see if the converter becomes visible. Also, if you have another TV available to you (instead of the above factory reset), try taking the Roku 4400 device to it and change the Display Settings there. (Settings/Display/720p). Then take the Roku 4400 back to the Sony and plug into the HDMI port.
Thank you very much for your reply/post. I probably will stop wasting my time on this. I think I can get it to work, but in the long run, it's probably not worth it.
