There is no multi-frequencies available, in fact roku went with just one frequency that ALL there current wifi devices use. Doesn't matter if roku tv, roku stick, roku soundbar or roku console, all respond to the same frequency.
This is not an option for the Roku Stick; I could not find the 'stand-by mode' in the settings.
Thanks for the post.
Can you please specify the issue you are experiencing?
With more detailed information, we will be able to assist you further.
Thanks,
Danny
I have led lights around my tv; when adjusting the volume on the Roku remote it triggers/changes the LED lights. I have since learned that it may be due to the Roku remote and LED working off the same signal. There are times when, if you point away from the tv, it still changes channels/volumes without messing with the lights....but it does not always work.
Unfortunately, overlapping IR codes have been happening for at least 40 years, and the more things you have that use IR remotes, the more likely you are to bump into it.
having LED lights in your room, it’ll change the color of the lights when you use your roku remote
As I mentioned in my previous post, the Roku remote won’t affect your LED lights if you loosely wrap a piece of black electrical tape around the LED light sensor.
And if you get close enough to the sensor and aim inside the loose tape, you can still control the LED lights with their own remote (if they have one). With this setup, I’ve been able to use my Roku remote constantly without it ever affecting my LEDs. This completely solved the problem.
