Enhanced Remote will not operate Panasonic TV
I recently purchased a Roku Streaming Stick with enhanced remote. I set it up per the instructions. The problem I’m having is that I’m unable to get a remote code to be recognized by the TV/remote. I...
Forum Discussion
The Panasonic power commands haven't changed in 30 years. I have found if you have line of sight to Roku you get better results during programming the remote. If you had HDMI coupler and HDMI cable you could extend the stick out from the back of the TV during programming. You can try telling it you have a Quasar tv, see if you get better results?
Lol. Line of site. That actually fixed my issue. I have to kinda point my regular remote at the ceiling. Forgot all about it.
I had similar problem operating my Panasonic TV using Roku remote to turn off power or control volume. After a google search i followed the steps listed below and my Roku remote now is able to turn off power and control volume.
- Press the Home button. on your Roku enhanced remote.
- Scroll up or down and select Settings.
- Select Remotes & devices and then select Remote.
- Select Set up remote for TV control.
- Follow the on-screen prompts to complete the process.
In case anyone else runs across this... I also have a Panasonic plasma TV. Mine is connected to the Roku through a receiver. To finally get my remote to detect the TV and then find the correct code to operate the volume and power I had to do the following:
- Connect the Roku directly to the TV.
- Use a newer high quality HDMI cable.
- Once the Roku was connected directly via a decent HDMI cable, then reboot the Roku.
After this the normal setup process where it plays music and tries to mute the TV worked. Once the remote was programmed for the TV, I was able to reconnect through my receiver. Now through DLNA between the TV and receiver, and the Roku remote IR, I can turn everything on/off and adjust the volume of both through the Roku remote.
This doesn't work for me. Is there anything else that will work
