Forum Discussion
I am trying to change the remote (paired) device with the streaming device, not the wireless frequency to the router). Can that signal be changed?
When i turn power on/off.. it's changing all roku's, not just this one.
Thank you for the post.
To better understand your situation, we would like to ask a few questions. Firstly, what models of Roku devices are you using? Knowing this information can help us determine if certain models are more prone to interference than others.
Additionally, how far apart are the Roku devices from each other? It is possible that the interference can be reduced simply by moving the devices further apart.
Once we have this information, we can provide you with more specific solutions to help reduce the interference and improve the performance of your Roku devices.
Thank you for choosing Roku, and we look forward to hearing back from you.
Warm regards,
Lianna
- MeeeeeeeTooooo3 years agoReel Rookie
The three models at play
Originally
9102X (streambar) with 3941x These two combinations were bad.! (the worst).
So i swapped the 3941x with 3900x, (lower model)
Now I have 9102x (streambar), with the 3900x, those are the two units fairly close to each other Iwith a wall between them ...the 3941x was removed so no chance of interference.
Roku streambar is in living room, approx 12 feet away from the wall. (strait away to the couch) There is an opening in the wall (walkway) to the dining room... the second TV is in the dining room, approx 35 feet away.
When we flip channels etc, , both Roku's change at the same time. The Roku in the dining room does not interfere with the streamstick... but when doing activity on the streamstick....both unit's change at the same time.