Forum Discussion

casmith's avatar
casmith
Newbie
3 years ago
Solved

No Audio with HD-Homerun Roku App

Hi, I had the same problem... went into the Roku settings/digital output format/Custom/DTS and turned it on. That fixed it on two different Roku models and two different TV manufacturers.
app support
  • jackalope52's avatar
    jackalope52
    3 years ago

    For those with no audio, I had the same issue.

    To fix I just went into Settings-Audio- and switched from "Auto" to Custom and just enabled Dolby (normal) and DTS.

    I restarted to make sure it took hold and then opened the app again and have audio now. This is on a Roku Express stick going to TV speakers.

    My Roku Express4k doesn't seem to have the same luck though with piping from HDMI to TV to receiver.

    Edit- the 4k to the soundbar was solved by changing the TV sound settings (for HDMI ARC to soundbar) to "bitstream" from PCM. After that change I had audio on that as well.

  • RokuTakashi's avatar
    RokuTakashi
    2 years ago

    Hi, magoo1978

    Greetings, and welcome to the Roku Community.

    Thank you for letting us know about the issue you've encountered with the HD-Homerun App on your Roku device. We understand the importance of having a seamless streaming experience, and we're here to help you resolve the issue as quickly as possible. To resolve the issue, we suggest following the steps outlined below:

    1. Navigate to the channel tile on the Roku home screen, press the star (*) key on your remote, and choose "Remove channel".
    2. Next, restart your device from Settings > System > Power > System Restart (If you do not see a Power submenu, skip to the next step).
    3. Once your player/TV starts up again, go to "Streaming Store" on the Home screen, and add the channel back once more.

    If the issue persists after performing the troubleshooting steps above, please let us know, and we'll assist you further.

    Best wishes,
    Kash

  • Cbud225's avatar
    Cbud225
    2 years ago

    I think I figured out my issue:  While you are in the HDHomerun app, press the asterisk button, then you’ll see a setting for Volume Leveling.  If it’s On, set to Off.  This resolved for me.

Cbud225's avatar
Cbud225
Newbie
2 years ago

I think I figured out my issue:  While you are in the HDHomerun app, press the asterisk button, then you’ll see a setting for Volume Leveling.  If it’s On, set to Off.  This resolved for me.

  • ejohnjones's avatar
    ejohnjones
    Newbie
    8 months ago

    This absolutely solved the problem for me… thank you for posting.   I should add - I followed all other suggestions (ensuring DTS was enabled in the sound output options in my Roku audio settings, ensuring that bitstream instead of PCM was enabled in my soundbar advanced settings).  These may have had an impact considering I did not perform negative testing without these in place.  But until I used the asterisk option on my Roku (while the HDHomerun app was open) and turned off volume leveling, the AC3 playback error message would appear.  As soon as I turned off volume leveling, navigated back to the Roku Home Screen (effectively shutting down the HDHomerun app), and opened HDHomerun again, the AC3 playback error was gone and the sound immediately was working!