Roku Ultra 4802R only detects one device when attached to a 4-port USB 3.0 Hub
What was the resulting solution to this external usb issue? I am having the same issue with the 4802R purchased 11/23.
Forum Discussion
Is this thread dead? Seems like no one is getting answers. I tried contacting Roku agents, but when I got to the point where it states, "lets get in touch", it just continuously buffers every time, and not at any other point. It is like they do not want to help...
I was under the impression that USB hubs would work, but then I've never tried using one. Officially Roku doesn't support it, so there's probably nothing that can be done to make it work. This is why my media is all on a computer that can be accessed from any device (Roku or otherwise), and the computer can handle transcoding for unsupported media files. Overall Roku supports DLNA media servers "adequately" but there are a few issues. Using a media server like Plex or Emby bypasses those issues, as they use their own dedicated app on a Roku and not Roku Media Player, which has some issues.
The hubs apparently, from what I've heard, worked with the Roku 3, as long as they were powered. I'm not very tech savvy, and my hard drive is too small to hold all my movies. I was hoping it was possibly a flaw in certain Uktra models and the hubs may work with newer ones. Maybe certain high quality hubs would work. I was just hoping for some guidance from Roku 😞
Well, the Roku 3 is really old (two versions, released in 2013 and 2015), and uses a completely different chipset compared to the later models. So it's not surprising it might not work with the latest models. And again, Roku doesn't officially support multiple drives, so any prior working scenarios were just lucky.
Okay, but per an article on the Roku support site, "If you have a non-powered USB hub connected to the USB port in the Roku device, then you should try the following:
- Remove the hub and connect the USB drive directly to the Roku device
- Reduce the number of devices connected to the USB hub
- Replace the non-powered USB hub with a powered USB hub", which is what I did...
