Forum Discussion

Middy1's avatar
Middy1
Channel Surfer
2 years ago
Solved

Connecting players and channel scanning

When scanning for channels during the setup. The was a prompt if you need channels for vcr/dvd combo or either. I skipped that during a later scan. Now it does not prompt if you need those extra chan...
TV & Player Setup
  • RokuJharra-Q's avatar
    RokuJharra-Q
    2 years ago

    Thanks for keeping us posted, Middy1!

    In this case, you need to manually set up the input for DVD, Cable, or antenna on your Roku TV, follow the steps below:

    1. Go to Settings, 
    2. scroll down, select TV Inputs,
    3. look under Inputs not being used, 
    4. select the appropriate Input that your DVD player uses,
    5. and choose Set Up Input.

    Once you finish, the input will be visible on your home screen and ready to use.

    For further information, please visit our support page here on How to set up TV inputs on your Roku TV system.

    We hope you'll find this helpful info. Let us know if you still have any questions.

    Thanks,
    Jharra

RokuJechealR's avatar
RokuJechealR
Retired Moderator
2 years ago

Hi Middy1,

Greetings from the Roku Community!

We are interested in learning more about the problem you are experiencing. May we know if you have a Roku device connected to a TV or a Roku TV? Are you encountering any error messages or error codes? In addition, what troubleshooting steps have you already taken to try to resolve the issue?

By providing additional details, we will be better equipped to provide further assistance.

All the best,
Chel

Middy1's avatar
Middy1
Channel Surfer
2 years ago

I have a Phillip's Roku tv 32. There are not any error messages or codes.

I have tried doing a restart and also having dvd/vcr disconnected while doing this. I am not sure if this connection is done automatically without the channels that are used that the device needs to be set to. Like channel 2/3 on the tv. I also have the dvd/vcr connected with a video cable not the antenna cable

 As far as error messages when you check the input for the device it is asking if it is on. Even when it is on.

I think something is missing since the update for how you can select channels from the side bar.

  • RokuJharra-Q's avatar
    RokuJharra-Q
    Retired Moderator
    2 years ago

    Thanks for keeping us posted, Middy1!

    In this case, you need to manually set up the input for DVD, Cable, or antenna on your Roku TV, follow the steps below:

    1. Go to Settings, 
    2. scroll down, select TV Inputs,
    3. look under Inputs not being used, 
    4. select the appropriate Input that your DVD player uses,
    5. and choose Set Up Input.

    Once you finish, the input will be visible on your home screen and ready to use.

    For further information, please visit our support page here on How to set up TV inputs on your Roku TV system.

    We hope you'll find this helpful info. Let us know if you still have any questions.

    Thanks,
    Jharra

    • Tiger6782's avatar
      Tiger6782
      Newbie
      2 years ago

      I absolutely followed these instructions to complete setup for a dvd combo and it is NOT on the home screen?????

      s