Forum Discussion

tsliva4's avatar
tsliva4
Reel Rookie
11 months ago
Solved

Roku Soundbar needs reboot every startup

My Soundbar does not startup when I power up the TV. I need to press the reboot button to get it to come up each time. I tried resetting the remote, changing the HMDI cable. It works fine after I reboot it but it seems to go into some mode when I turn the TV off since the light blinks very slowly...

  • RokuHaz-M's avatar
    RokuHaz-M
    9 months ago

    NotlikngMuch 

    Welcome to the Roku Community! We're glad you're here.

    We totally get why the soundbar not kicking in when you turn on your TV is frustrating, especially having to hit that reset button on the back for it to work. We can attempt some troubleshooting steps that may help us resolve the issue. Let's set up the remote so you can use the Roku remote to control the TV and turn on the soundbar. Here are the steps: Go to Home > Settings > Remotes and Devices > Remote > Set Up Remote For TV Control

    For more detailed info visit this link.

    Let us know if this helps.

    The Roku Community Team 

8 Replies

Replies have been turned off for this discussion
  • RokuEmmanuel-D's avatar
    RokuEmmanuel-D
    Community Moderator
    11 months ago

    Welcome, tsliva4.

    Greetings from the Roku Community!

    We see that you're experiencing unintended behavior when trying to start up your Roku Streambar. We'd like to help you out and provide a resolution to your problem. 

    Have you considered activating the one-touch play feature on your Roku device? This convenient option allows your Roku to seamlessly switch the TV inputs for you. Once enabled, as soon as the Roku is connected to a power source and powered on, it will automatically change your television’s input to the correct source, making it ready for instant use without any extra effort on your part. To enable that, go to Settings > System > Control other devices > put a checkmark on "1-touch play".

    Please let us know if this works for you. 

    All the best,
    Emman

    • tsliva4's avatar
      tsliva4
      Reel Rookie
      11 months ago

      Thank you for the reply.

      I already had the one touch play selected so I tried it both unselected and selected but it made no difference either way.

      The unit seems go off since the light goes out and once I hit the rest button it comes back up fine. The TV states there is no source to connect to until I hit the reset button then it connects fine...

      Here is the unit I have

      Model 9102R, Serial #YL006L945506, SV: 14.0  Device: 2A1286945506

      any further suggestions would be appreciated

      Thank you...

      • RokuEmmanuel-D's avatar
        RokuEmmanuel-D
        Community Moderator
        11 months ago

        Thanks for keeping us in the loop, tsliva4.

        Could you please test the device on a different television to determine whether the same issue occurs? Additionally, it would be helpful to swap out the current high-speed HDMI cable for another one, as this might enhance the performance and resolve the problems you’ve been encountering.

        Please keep us posted. 

        All the best,
        Emman