Trying to set up this Roku SE HD to my Motorola TV (Model MS3650C129) with RCA connection. I use the same connection position that my DVD uses, removed those connections and an using a HDMI to RCA product https://www.amazon.com/gp/product/B09N22LRGJ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
I set my TV on AUX like I can play a DVD but I get nothing from the Roku. The Roku light is blinking slow. But nothing else.
Am I doing something wrong? Any idea what may be the issue?
Thank you
A simple cable like that won't work. You need an HDMI-to-RCA converter. It will be a little box. Just make sure it goes from HDMI to RCA and not the other way around. Something like this:
https://www.amazon.com/Composite-Converter-Supports-Chromecast-DVD-Black/dp/B0732NF969/
Note that I have no experience with that particular one and these things can be finicky and/or give less than optimal results.
A simple cable like that won't work. You need an HDMI-to-RCA converter. It will be a little box. Just make sure it goes from HDMI to RCA and not the other way around. Something like this:
https://www.amazon.com/Composite-Converter-Supports-Chromecast-DVD-Black/dp/B0732NF969/
Note that I have no experience with that particular one and these things can be finicky and/or give less than optimal results.
I am at a loss now. The TV operates correct. Broadcast TV and DVD source come thru fine. I purchased the above suggested HDMI to RCA converter and installed it. Initially it works but within a few mins, like 3, the picture scrambles or jeeters then stabilizes in only black and white. I thought the TV might be failing but I can go to broadcast and DVD without color or stability issue. Only when I use the converter. I checked the switch to make sure I was not on PAL.
Now what?
@wshades, did you try PAL? I pulled out an old converter I got several years ago and the switch is labeled backwards.