Roku ultra remote volume not working
The volume controls on my Roku Ultra periodically stop working. I've only had this remote for 3 months, had to replace the last one because of volume issues thinking it was a bad remote but now again same thing! I've done all the updates and troubleshooting and reconnecting. Im not the only one who has this issue it's been going on for years and needs fixed!
Can’t connect to older Hisense
I have an older Hisense that will not connect with the tv to control the volume or turn off and on. It works for everything else but I lost the remote and NEED to be able to control the volume. I have done the remote setup several times and looked on Roku community forum but idk what else to try. It is NOT a Roku or a smart tv. It’s just a LED LCD tv. Model 32H3B1Streaming Stick4K and Voice Remote Setup Pairing Issue
I am having the same/similar issue!! But I have a Streaming Stick. Re: Re: Remote not working and re-pairing light does not come on I did all of the recommended troubleshooting suggestions from this community and through ROKU site for my voice remote but the remote still does not work and any attempt the re-pair is not working as the light does not come one/did not blink. Summary: Came home, TV was on home screen, remote not working. Any buttons I pressed, nothing happened. Will not turn on or off TV, nothing. I have a Streaming Stick 4K - just got in May 2024. I am using the USB power cable with long range wifi receiver built in to the cord which connects to the stick. I did all the trouble shooting: - Checked the batteries, and replaced them (reset remote) just in case - Checked my wireless connection (router is not the issue) - I do not have an HDMI extender in the event that there are problems with the remote due to "HDMI interference" but once I have all of the info I need (Device ID (don't have atm), serial ID# (X02500XWK08K), Model# (3820CA2), I can order one to see if that fixes the problem...in future. But that doesn't help me right now. - I rebooted my devices *** I did this several times. ONE TIME, when I went to re-pair the remote (after holding down home and back button on remote for 5 sec), the light blinked green for a moment... then nothing happened. I waited for the two to pair, but nothing. Still buttons don't work, remote not paired. Consecutive tries after repeating the process did not yield any light blinking...So... - I did a factory reset. The opening screen following the reset was to re-pair the remote but because the remote is not working, I cannot select the language or settings, etc for the next steps that they are asking. When I take the batteries out, put them back in and press the home and back button for 5 seconds, nothing happens. No lights blink. So the remote won't re-pair. Also...I cannot access the Device ID (don't have original packaging now). The Serial Number and Model number I found by downloading ROKU app and looking at my account and looking online where I bought the device. I cannot go to: Settings > System > About on my TV because the remote doesn't work! So, what do I do now? Is there something else I can try or do I need a new remote and if so, is it under warranty still? I registered it online May 09, 2024. Who do I contact to get a new remote - will warranty cover it through Roku or where do I buy a new one? Can you respond here but also to my private email so I do not miss a response? I will add, I also tried plugging in my stick to another HDMI port with the same results. This would be the second time since May 2024 that I have had to factory reset my Roku Streaming Stick 4K. The first time was not a remote issue. I thought it was a router issue and had a new one installed and an ethernet cable now runs from my TV to my router, so I am not sure why the remote isn't working (not connecting to the wifi?) and won't re-pair
Westinghouse Roku TV Remote Connect Help
This is EXACTLY my problem. When I’m lucky enough to get the initial TV screen to come on, it always ask for a language preference and none of my THREE physical remotes or two phone remotes can get it to respond. And it always says to hit “home” but I don’t see that icon on ANY of my remotes! Please advise before my girl goes craZy again!
Enhanced Remote will not operate Panasonic TV
I recently purchased a Roku Streaming Stick with enhanced remote. I set it up per the instructions. The problem I’m having is that I’m unable to get a remote code to be recognized by the TV/remote. I’ve gone through all 45 codes and the music doesn’t turn off. So my Roku remote doesn’t turn on/off the TV or control the back button. My sound goes to a sound bar so I’m not worried about the sound controls. The pause and play controls seem to work too. Any ideas/tips/tricks on how I can get the remote to work with my Panasonic TV? Thanks!
Roku remote changes volume to max on it own, unmutes on its own.
I have searched and anything I found is from back in 2023. Check my stick+ for updates, and it was last updated this past week. 1) This AM it has "randomly" started changing volume to maximum. While trying to diagnose it, also found that if muted, it will un-mute and go full volume. I had taking the batteries out of the remote and it the stick still does this. 2) If "ear buds" are plugged into the remote, then this behavior does not happen. Again, this just started this AM. Interesting thing -- we had this unit put up some weird message about video loss if one doesn't... , and I power cycled it and reported it only to get the standard answer about Roku does not charge.... That was not my question, so now my question again, has a LAN attack vector/surface been reported or seen with Roku being the intial target? Would/could this be an indication of such?
