I recently purchased a Roku Streaming Stick with enhanced remote. I set it up per the instructions. The problem I’m having is that I’m unable to get a remote code to be recognized by the TV/remote. I’ve gone through all 45 codes and the music doesn’t turn off.
So my Roku remote doesn’t turn on/off the TV or control the back button. My sound goes to a sound bar so I’m not worried about the sound controls. The pause and play controls seem to work too. Any ideas/tips/tricks on how I can get the remote to work with my Panasonic TV? Thanks!
The Panasonic power commands haven't changed in 30 years. I have found if you have line of sight to Roku you get better results during programming the remote. If you had HDMI coupler and HDMI cable you could extend the stick out from the back of the TV during programming. You can try telling it you have a Quasar tv, see if you get better results?
Tivoburkee Thanks for the suggestions! I will try the Qusar suggestion tomorrow. And If that doesn’t work I will contact Roku for the cable to extend the stick to the front of the TV for programming. Tanks again!
My remote quit turning off my Panasonic TV too. The remote still turns on the TV and adjusts the volume. I researched this problem and discovered that you can use the voice command on the remote to tell it to turn the TV off. Works every time!