Playback Issues - Audio/Video & Power

Help with audio & video playback issues, TV display type recognition & compatibility, HDCP messages, troubleshooting playback errors, advertisements, and resolving power issues.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Level 7

yamaha receiver not passing the signal to the BenQ projector

Yamaha receiver RX-V477, Roku 3, BENQ projector MH539FHD - issue is - power up Roku, start up screen shows through projector, once complete, screen goes blank, no audio or video is passed to projector. I have tried every setting on the receiver and on the projector, but i doubt its the projector - anybody got any advice, tks 

0 Kudos
1 Reply
Highlighted
Level 21

Re: yamaha receiver not passing the signal to the BenQ projector

First, temporally connect the Roku directly to the projector. That's the only way to eliminate the projector itself as an issue. Next, try a different HDMI cable from the AVR to the projector (if possible). 

I have my Yamaha AVRs both set to video passthrough, as I expect yours to be. Since your AVR is capable of upscaling the video to 4K, and your projector is 1080, you need to ensure that isn't happening. 

A bad HDMI cable or dirty connection between the Roku and the AVR is also a possibility. 

Dan
Roku Stick (3600), Ultra (4640), Ultra (4670), Premiere (3920), Insignia 720p Roku TV, Sharp 4K Roku TV, Nvidia Shield, Windows 10 Pro x64 running Serviio and Plex on a wired Gigabit network.
0 Kudos