Features, settings & updates

[ttmii]

I have 7 Roku streaming sticks in my house, 4 of which are controlled by Logitech Harmony Hubs.  Two of the 4 have updated to 14.1.4:7708 on 12/13/24.  The 14.1.4:7708 update does not work with the Harmony Hubs, and will only work with the Roku remote.  The previous Roku software versions have worked fine.  All other devices controlled by these Harmony hubs work fine (HDTV, home theater, DVD, Bluetooth)

I’ve tried rebooting the harmony hubs, rebooting the Rokus, power cycle both, and controlling via the Harmony app on my iPhone.   None of the troubleshooting has worked.  Is there a solution for this?

Location	Roku Type	Last Update (as of 12/14/24)	Current Software Version	Works with Harmony Hub Remote	Works with Harmony iPhone App	Works with Roku Remote
Master Bedroom 1	3820R2 – Streaming Stick 4K	12/13/24 2:59pm	14.1.4:7708	No	No	Yes
Recreation Room	3810X – Roku Streaming Stick+	12/13/24 2:34am	14.1.4:7708	No	No	Yes
Master Bedroom 2	3810X – Roku Streaming Stick+	10/18/24 10:27pm	14.0.4:12221	Yes	Yes	Yes
Family Room	3820R2 – Streaming Stick 4K	11/15/24 5:00pm	14.0.4:12221	Yes	Yes	Yes

[Jesk]

You aren't alone - I'm been Googling frantically because I lost control of my Roku Ultra using the Sofabaton X1S remote and hub yesterday. I'm flipping out because I've only had the X1S system for around three weeks. Maybe there is some obscure way to roll the Roku update back. And maybe I should hold off on returning my X1S. If it is happening to Harmony also, then it doesn't matter which hub I use. If Roku personnel monitor these threads - HELP!!

Roku Ultra (4660, 4661, 4662 series) 

[Jesk]

UPDATE: I found a post on Reddit that mentioned a new (or previously unimportant) setting on the Roku:

"...there is a setting in Advanced System Settings on the Roku called Control With Mobile Apps. This was set to Limited and it wouldn't work. I set it to permissive and that fixed it."

My Roku had the same "Limited" default setting. I set it to "Permissive" and it worked again. Unfortunately in my case I had to delete the device again AND the activity for watching TV and create them again. I don't know if that is because I messed with it so much last night. The Harmony might be kinder. But have a look at that setting on your Roku(s) and see if this helps. 

I hope it helps - enjoy the rest of your weekend!

[dewaynej]

I had the same issue starting yesterday.  But before I found the "fix" above, I had deleted my Roku Ultra and associated Watch Roku activity from my Harmony.  I added the Roku back and re-setup the activity.  The issue I now have is that all of the Roku "channel" icons only show up as boxes with numbers in them on my Harmony - both on the remote itself and on the Harmony app on my iPhone.  I have rescanned several times and still not getting the graphic icons to show up.  I contacted Logitech and was on a chat with them for quite some time this morning trying several of their suggestions, but nothing resolved the issue.  They "escalated" the issue within Logitech.  I'll see what they come back with if anything.  Now wondering if the issue could possibly be with Roku and the 14.1 update??

[Jesk]

Yes, I had that too!! I had to delete the Roku device set up on the hub and delete the full "Watch TV" activity completely and start from scratch. I think it must have had something to do with the Roku update. But when I tore it all down and added the Roku as a new device (and set the Roku advanced setting to permissive) and recreated my Watch TV activity, I got it all back - including the special Roku buttons. Make sure you select the method as Wifi, because some of those buttons won't work if you use IR. I did it several times and it kept failing - played with it for like an hour and finally got it. When creating the Watch activity make sure you add the Roku first. The Harmony is certainly different than the Sofabaton, but it's similar. Hopefully after a few tries it will come around for you. Very weird problem, and neither Roku nor (in my case) Sofabaton got back to me. Best of luck to you! 

[RTGilroy]

This fixed my issue! Thanks!

I have two Roku Premieres controlled by Logitech Harmony hubs and both ran afoul of the Roku update. Switching The setting to permissive worked for me.

[Funtz]

Same issue. I was out of town last night and my wife mentioned the Harmony remote stopped controlling the Roku streaming stick immediately after some sort of software update. I’m home now and tried deleting and re-adding the Roku within the Harmony app before Googling and finding this thread. No issue controlling the Roku with its own remote and all other Harmony-controlled devices work fine. Hopefully Roku will see this quickly and address after the weekend. 

I was considering upgrading to a Roku Ultra for faster processing but will definitely hold off until this is resolved. 

[Funtz]

Updating my own reply from a few minutes ago after seeing the other posts — changing the advanced setting to “permissive” resolved the issue. Thanks Internet!

[TB52]

That works.  Thanks!