Forum Discussion

esebm's avatar
esebm
Channel Surfer
2 years ago
Solved

Something's wrong with my 4k stick!

When I turn on my PC and switch to the HDMI port the screen says "Loading" and then "No Signal". I have to unplug the power connector from the stick, put it back in, wiggle it a bit and then the LED comes on and flashes a few times. After that everything works. Happens every day when I turn it on. Is that normal?

tv & player wifi
  • renojim's avatar
    renojim
    2 years ago

    Does your stick have a "Power saving" option under Settings->System->Power?  If so, try disabling it.  You should be able to wake it from power saving by pressing Home on your Roku remote a couple of times.

4 Replies

Replies have been turned off for this discussion
  • renojim's avatar
    renojim
    Community Streaming Expert
    2 years ago

    Does your stick have a "Power saving" option under Settings->System->Power?  If so, try disabling it.  You should be able to wake it from power saving by pressing Home on your Roku remote a couple of times.

    • esebm's avatar
      esebm
      Channel Surfer
      2 years ago

      I don't know, Ill have to check it. Where are the settings?

      • renojim's avatar
        renojim
        Community Streaming Expert
        2 years ago

        "Settings" are on the left side of the Home Screen.  Press Home on your Roku remote a couple of times and then navigate to "Settings", press OK, go down to "System", press OK, go down to "Power" if it's present.  Not all Roku devices have "Power" settings.

  • esebm's avatar
    esebm
    Channel Surfer
    2 years ago

    Guys, thanks for the help. Everything works fine now.

    Much appreciated!