Forum Discussion

jprkas's avatar
jprkas
Reel Rookie
2 years ago

Roku Keeps scrolling and won't stop at all.

Hi

Having the problem that has been posted before. When my Roku express remote is pointed at (vizio) TV it just scrolls non stop & device/player lights flashes/ flickers. Tried rebooting, changing batteries etc nothing works. Do I need a new remote and or complete new Device or is there a solution. Any advice will be appreciated as i'm a oldie and not much use with this. Had to get someone else to set me up.

11 Replies

  • RokuJharra-Q's avatar
    RokuJharra-Q
    Retired Moderator

    Thank you for reaching out to us here in the Roku Community, jprkas!

    We see that you're experiencing issues with your Roku remote, and we're here to help you with this. Before we begin, could you please check to see if there's a button that might be stuck? Also, when did the issue occur? Did restarting the device help?

    In the meantime, please consider using our Roku mobile app for temporary and backup remotes. For detailed instructions, please refer to our dedicated support article: How to use the Roku mobile app.

    Please keep us posted.

    Thanks,
    Jharra

    • jprkas's avatar
      jprkas
      Reel Rookie

      Hi

      Thanks for your reply, no it's not a stuck button. Tried all the steps advised on here. Just scrolls non stop when remote is pointed at Roku receiver. Can stop the scrolling by holding down any button, but once released menu starts scrolling again, cannot do anything else. Any advice, have not got the knowledge to try anything else ie. phone app etc

      • renojim's avatar
        renojim
        Community Streaming Expert

        jprkas, how do you know it's not a stuck button?  Does the scrolling stop if you take out a battery?  You can also see if the remote is constantly transmitting by pointing it at a digital camera like the one in your phone.  When you press a button on the remote (or if it's constantly transmitting something) you'll see a flash coming from the end of the remote on the camera's screen.

  • My roku menu keeps scrolling. I got lucky once and got to the reset and it didn't stop it. Can you hekp me out?

    Thanks,

    Bill

    • RokuJharra-Q's avatar
      RokuJharra-Q
      Retired Moderator

      Hi BillSchaefer, we appreciate your first post here in the Roku Community!

      We understand that you have experienced issues with your Roku remote, and we would like to learn more about this problem. Can you please provide the following information to assist you better?

      • Was there any recent update on your Roku device before this issue occurred?
      • Is this the remote that came with your Roku device, or was this purchased separately?
      • What troubleshooting steps have you attempted?
      In the meantime, here are some steps you can try to troubleshoot your physical remote.
      Reboot your voice remote
      If your voice remote uses standard AA or AAA alkaline batteries, you can reboot it by removing and reinstalling the batteries.
      1. Remove the battery cover on the back of your remote
      2. Remove both batteries from the battery compartment
      3. Re-insert the negative (-) end of a battery first and then gently push the positive (+) end until the battery clicks into place
      4. Repeat the previous step to install the second battery
      5. Put the battery cover back on your remote
      If the issue persists, replace the batteries in your voice remote and insert them using the same steps provided above. After doing so, pair them again to see if this makes any difference.
      For reference, here's the support article dedicated to this: How to fix your Roku voice remote that is not working

      We'll be looking forward to your update.

      Best regards,
      Jharra
      • BillSchaefer's avatar
        BillSchaefer
        Reel Rookie

        I do not have a voiuce remote, but i changed the batteries anyway for no help. The remote came with the set I bought from Target. As I mentioned I was able to reset the unit back to factory settings but it didn't help. Yes there was a software update before it happened but it was a seek or two before. I also tried unplugging the unit from the pwer source for 24 hours and that didn't help. Pleae help me out!

        Bill