Forum Discussion
The Roku app will only connect to a Roku TV/Player if both are on the same private network. If you're using mobile data on your phone, then you are not connected to your personal network. This is a security feature. You cannot use the app to control a Roku unless both devices are on the same network and that network is using a Private IP address configuration. In most cases, a home network IP address should begin with 192.168, with the last two octets having a zero or one on the third octet and a number between 2 and 254 in the last octet. Note that in a home network, the first three octets must always be the same number, with only the last octet being different for every connected device. There are exceptions to this, but it's highly unlikely that a home network would used something different.
Also, if you're using a shared WiFi, such as a dorm, hotel, or some apartment complexes, those will have security enabled that will block your phone with the app from seeing your Roku, so the app will never work on such networks.
- atc980927 months agoCommunity Streaming Expert
One last comment: when the phone is in hotspot mode, the phone itself is not part of the network that is being created by the hotspot so the app won't work under that scenario either. So if you want app control and you can only use a phone hotspot for your network, you need an additional device to run the app on that can connect to the WiFi hotspot, such as a tablet or another phone also connected to the hotspot.
- HayesR7 months agoReel Rookie
Is there any way to change the configuration of the access point on my phone so that the app can still connect? For example, can I change the type of IP address or security settings?
By the way. I would like to recommend a great service with a large selection of games. Herehttps://perabet-tr11.com/ you will find everything you like. Convenient and intuitive operation and excellent support service.- atc980927 months agoCommunity Streaming Expert
No, the phones aren’t designed that way. It’s mostly for security, so that your phone can’t be accessed by anything connected to it.