Remote adjusting volume, no other buttons workjng

Question

I got a new remote yesterday and successfully paired and used the remote for all of 24 hours. Now the remote will only adjust the volume up and down. No other buttons are working. What the heck happened and how do I fix it?&nbsp;

renojim · Answer

My pairing method (that hasn't failed me yet) differs slightly from those steps.&nbsp; I only connect the power to the Roku device once the pairing light is flashing and I set the remote down close to the device before I connect the power.If you have any other Roku devices you may want to disconnect the power to them just in case they're interfering in the pairing process.&nbsp; Just out of curiosity, is the Roku device still connected to your Network?&nbsp; Can you use the app on your phone/tablet to control it (not suggesting that as a fix)?One other thing - batteries can make a big difference.&nbsp; I've had batteries that will work fine once the remote is paired, but won't get the remote paired in the first place.&nbsp; Don't assume the batteries that came with the remote are any good.

HDMIGuy · Answer

mackcarlson&nbsp;You do not indicate what Roku device you have.&nbsp; If your remote is a voice remote it has a pairing button in the battery case.&nbsp; Press and hold this for at least 5 seconds.&nbsp; It should flash and pair with your device.&nbsp; If this does not work tell us the model number of your Roku device.

mackcarlson · Answer

I have a roku voice remote but without the pairing button in the inside. I followed the instructions to hold the home and back buttons for 5 seconds. That paired my remote initially on Monday. I tried to repair the remote using the same method Tuesday night but the roku wouldn’t pick recognize the remote. That said, as of now it still will control volume.&nbsp;

HDMIGuy · Answer

mackcarlson&nbsp;I found this on the Roku websiteRe-pair your voice remote to your streaming devicePut your streaming device in pairing mode:Remove the power cable from your streaming deviceWait at least 5 secondsRe-connect the power cableWait for your streaming device to power on, and the&nbsp;Home&nbsp;screen to appear on your TV screenWithin 30 seconds of seeing the&nbsp;Home&nbsp;screen on your TV screen, put your voice remote into pairing modePut your voice remote in pairing mode:Remove the battery cover on the back of your voice remoteRemove both batteries from the battery compartmentWait 5 seconds and then reinsert the batteriesIf your remote has a pairing button, press&nbsp;and hold&nbsp;the&nbsp;pairing&nbsp;button for 5 seconds, or until you see the status light begin to flash.If your remote&nbsp;does not&nbsp;have a pairing button, press&nbsp;and hold&nbsp;both the&nbsp;Home&nbsp;button and&nbsp;Back&nbsp;button for 5 seconds, or until you see the status light begin to flash.If the status light does not flash, try replacing the batteries.Wait for 30 seconds while the remote establishes a connection with your streaming device.Once you streaming device and remote are connected, the pairing dialog will appear on your TV screen.Replace your remote batteriesRemove the battery cover on the back of your remoteRemove both batteries from the battery compartmentReplace the batteries with a new matching pair and test again

mackcarlson · Answer

HDMIGuy&nbsp; thank you, I found that as well. It is a voice remote, it has the voice command button right under the arrow controls. Number 5 gets you into pairing without the button but the roku wouldn’t connect to the remote&nbsp;

Forum Discussion

Remote adjusting volume, no other buttons workjng

6 Replies

Recent Discussions

How to return the Roku Ultra?

Roku TV Powering On for first time each day

Headphones (AirPod) and TV volume at same time.

Button lights won't come on now when I pick up the remote.

Connect to extender