Forum Discussion

Sangaris's avatar
Sangaris
Reel Rookie
3 years ago

Doesn’t show WiFi as an option

None of my 4 Rokus will show my WiFi as an option. I tried typing it in as a private network, but that doesn’t work either. Restarting and unplugging didn’t work. Since it can’t connect to the internet, it can’t be updated. All other devices connect just fine. 

Roku Stick, Express, Express 4K, and Ultra

error 014.30

5 Replies

Replies have been turned off for this discussion
  • RokuKarla's avatar
    RokuKarla
    Retired Moderator

    Hello Sangaris

    Thanks for posting in the Roku Community!

    For your Express or Roku Premiere device, please note that this is only compatible with wireless b/g/n networks on the 2.4 GHz network. In order for the device to connect, confirm that your router is broadcasting a 2.4GHz Wi-Fi network. You can check your device model by navigating to Settings > System > About.

    If you are getting an error code or message, refer to this link for common Roku error codes and their recommended actions: How to connect your Roku® streaming device to the internet using Wi-Fi® or Ethernet 

    Let us know how it goes!


    Regards,
    Karla

  • atc98092's avatar
    atc98092
    Community Streaming Expert

    Since you have a variety of different Roku players, and none are finding your WiFi, the answer is likely the WiFi channel in use on your router. For your 2.4 GHz only Roku player (the Express), the channel has to be 1-11. If your router is self-assigning 12, 13 or 14, your Roku won't see it. For the 5 GHz capable devices (all the rest) the channel has to be one of the non-DFS channels. So the channel has to be 48 or below, or 149 or higher. Also, make sure both your 2.4 and 5 GHz radios are turned on. Some ISPs that have control of your router have recently been turning off the 2.4 GHz radio.

    • Sangaris's avatar
      Sangaris
      Reel Rookie

      atc98092  It is 2.4GHz, but I’m not sure about the channels. Why would this happen all of a sudden?  They were working fine yesterday. 

      • atc98092's avatar
        atc98092
        Community Streaming Expert

        Most routers are set to Auto for channel selection. This means the router can and will at times change the channel in use. For 2.4 GHz, the best channels to use are 1, 6 or 11.