Adding indoor camera se device

Before you get started, make sure your smartphone or tablet is connected to your 2.4GHz Wi-Fi network (e.g., MyNetwork_2.4GHz).

Next, launch the smart home app and create a new Roku account, or enter the username and password for your existing account. After you sign in, perform the steps below to connect your camera.

1. Add your camera
   • Tap the plus sign from the navigation bar and select Add Device.
   • Select Cameras & doorbells and choose Indoor Camera.
   • Make sure your camera is powered on and the status light is flashing red, and then tap Next.
   • Press the Setup button on the bottom of your camera and listen for "Ready to connect". When you hear the phrase, check the box and tap Next.

2. Connect to Wi-Fi
   • Your 2.4GHz wireless network should be listed in the Wi-Fi network name pull-down.
   • Learn how to identify and connect to your 2.4GHz network.
   • Enter your password and tap Next.

3. Scan QR code
   • Hold your camera about 5 inches from the QR code and listen for "QR code scanned. Please wait.". When you hear the phrase, check the box and tap Next.
   • Learn what to try if your camera cannot scan the QR code.

4. Finish setup
   • After you hear “Setup completed,” the status light turns solid blue, and your camera is ready to use.
   • Name your camera and press Finish.

With the Wi-Fi connection, your camera can record videos to the cloud with your Roku Smart Home Subscription. You also get instant recordings when motion and sound are detected, and intelligent person, pet, and object detection. Learn more about the premiere features available with your Roku Smart Home Subscription.

If your camera is installed where there is no Wi-Fi connection or the signal is poor, you can install a MicroSD card to record videos.

We hope this helps.

Best regards,
John