roGridScreen SetupLists Limit on Old Rokus?

There's definitely no such limit on any Roku model. I have numerous channels with more than 10 rows on the grid screen (some with >100). Even if there were, the error wouldn't be "Member function not found in BrightScript Component or interface." That would suggest that you're trying to use a method that wasn't available on the 3.1 firmware. The error should include both a line number and the actual line that's causing the error. Are you able to share those?

Yeah, the line causing the error is this:

if content = invalid or content.count() = 0

I actually just told it to load the 10th list for 11, 12, 13 and 14 and it worked fine. So you're right no such limit.

So there's something not good in either my 11th or 12th list OR there's a memory issue with having too many videos?? Still trying to troubleshoot.

EDIT: Actually, I think it's something in last lists that I'm loading in causing the problem, I just loaded a 14 lists with 53 videos each and had no problem. Going to start troubleshooting from my content perspective unless someone can see something obviously dumb that I'm missing.


To give you a bit more, here's a sample of the code:

Sub showGridScreen(playlists, leftBread, rightBread)
	port = CreateObject("roMessagePort")
	screen = CreateObject("roGridScreen")
	screen.SetMessagePort(port)
	screen.SetGridStyle("flat-16x9")
	screen.SetupLists(playlists.count())						' populate the # of grid rows
	playlistTitles = []									' empty array of playlist titles
	content = []

	bc = NWM_Brightcove(m.brightcoveToken)

	For i=0 To playlists.count()-1
		content.Push(bc.GetEpisodesForPlaylist(playlists[i].playlistID))

		if content[i] = invalid or content[i].count() = 0
			ShowConnectionFailed()
			return
		end if

		playlistTitles.push(playlists[i].shortdescriptionline1)
		screen.SetContentList(i, content[i])					' an array of content-meta-data
		screen.SetListOffset(i,0)							' seems that grid format always starts user 3rd video over, correct this for every playlist
	End For

Perhaps that "content" is an associative array, which if you try to to .count() won't work on older Rokus and give that exact error (I believe). When it crashes it also gives you the variables, and you should be able to see what i currently is.

You're right, it is an associative array. Removing that line to check actually fixed the issue, but those particular lists now aren't loading any videos (list and its title is there, but every video is blank). I'm seeing videos in lists 1 through 10 but 11 through 14 aren't loading the videos…

Now I'm not sure what to do … I didn't realize that older Roku's would have an issue with associative arrays.

I can load those last lists of videos if they are the only ones, but not when I'm loading all the other lists of videos.

I'll try messing around with passing the lists in another way I guess, if I can.

Always open to suggestions too if there's a "best practice" sort of thing out there.

Thanks for the insight guys!

Instead of content.count() = 0, you can (and should?) use content.IsEmpty(). That works on old and new Rokus. It's only the .Count() method that wasn't added until 6.x for associative arrays. There's no other issue with associative array support on legacy boxes, so it definitely sounds like something else is going on.

It's also worth reminding/pointing out that the old Legacy Rokus where this is an issue are officially no longer supported. If you're planning on publishing this channel as public, then you won't need to bother with legacy support, as you won't be able to publish to those devices anymore, anyway.

Wasn't aware of .IsEmpty(), thank you, will try that.

And yes, the legacy box issue I'm having sounds like something else is going on to me as well … I'll likely need to step through the content in the arrays and figure out if I have something not getting set in my arrays of content properly … I'll work on that Monday I suppose.

As far as the legacy support goes, I am definitely keeping that in mind.

Thank you