Need to generate a key

once you telnet in, type genkey

You should, after 30-60 seconds get a newly generated password and key which you should save somewhere in a file. Consider using another telnet client like putty if it isn't working correctly the way you are doing it now.

- Joel

Shouldn't I be getting some kind of response on the screen? The documentation seems to indicate that I should. How do I know if the key's been generated properly?

Tried this with both Windows telnet client and PuTTY.

"ianbeyer" wrote:
Shouldn't I be getting some kind of response on the screen? The documentation seems to indicate that I should. How do I know if the key's been generated properly?

Tried this with both Windows telnet client and PuTTY.

You should see the device serial number and ethernet/wifi MAC addresses as soon as you connect to 8080. Are you even getting them? e.g.:

C0D02T00XXXX
ETHMAC 00:0d:4b:57:XX:XX
WIFIMAC 00:0d:4b:57:XX:XX
>

If you're not, I'm not sure what to suggest, other than trying to reboot the roku. Since you can connect to 8080 it doesn't sound like a network or telnet client issue.

After reboot, I get the MAC addresses on the screen, but when I type genkey, It kicks me back to the prompt, with no indication that it's doing anything or has done anything.

Is there a firmware update for this thing? This one seems kinda buggy.

(and after doing it once, I can't connect again. It's back to its old tricks)

OK, interesting. PuTTY doesn't like it. Windows telnet was happy with it.

"ianbeyer" wrote:
OK, interesting. PuTTY doesn't like it. Windows telnet was happy with it.

I've only ever used windows telnet (windows 7) to connect to my boxes, never had any issues. So you got genkey going? One thing that's important to note is that the device only supports one connection at a time (per port, 8080 and 8085 can both be connected at once). So if putty is hanging onto the connection, windows telnet would act like it's hung.

Once the key is generated, shouldn't the packager link show up in the browser interface? I've rebooted the roku after running genkey, but still no packager.

It eventually showed up, had to generate the key a few times before it took.