Forum Discussion
HolsMA14
2 years agoNewbie
After confirming the volume buttons are working on the remote to control the TV, we are taken to a screen that states: Enjoy Your Stored Content. Once there the remote no longer works. Turning the roku and TV off/on does not help as you have to redo the set up and end up right back here.
RokuEuniceL
2 years agoRetired Moderator
Hi HolsMA14,
Welcome, and thanks for posting to the Roku Community!
We're happy to help you with your remote issue. Please follow the steps below on how to put your streaming device and voice remote in pairing mode:
- Remove the power cable from your streaming device.
- Wait at least 5 seconds.
- Re-connect the power cable.
- Wait for your streaming device to power on and the Home screen to appear on your TV screen.
- Within 30 seconds of seeing the Home screen on your TV screen, put your voice remote into pairing mode.
- Remove the battery cover on the back of your voice remote.
- Remove both batteries from the battery compartment.
- Wait 5 seconds, and then reinsert the batteries.
- If your remote has a pairing button, press and hold the pairing button for 5 seconds, or until you see the status light begin to flash.
- If your remote does not have a pairing button, press and hold both the Home button and Back button for 5 seconds, or until you see the status light begin to flash.
- If the status light does not flash, try replacing the batteries.
- Wait for 30 seconds while the remote establishes a connection with your streaming device.
You can also check out this link here for more details on how to fix your Roku voice or simple remote that is not working.
All the best,
Eunice